As a start please post the output of 'ifconfig' (linux command on your host machine) or 'ipconfig /all" (windows cmd command).
Are you on 1 Gbe or 10? Please describe the entire connection chain from the USRP to your host machine. (include any adapters you are using along the way) Also paste the error messages you get with running benchmark_rate. Ali Dormiani On Tue, Aug 21, 2018 at 9:18 AM, Garnham, John via USRP-users < usrp-users@lists.ettus.com> wrote: > I just purchased an X310 and have tried to get it work under both Linux > and Win 10. In both cases installed the latest correct driver and > associated FGA image. I can ping it, can run probe, but the benchmark_rate > fails with numerous dropped packets and lots of error messages. > Additionally the channel 0 ethernet port status light is yellow, not green, > and by the documentation, it appears yellow is some kind of non-optimal > state. Finally GNU radio cannot find the device, but the UHD > uhd_find_devices does find the x310. > > > > I am at a loss what to do now, other that “read the manual” documentation > on-line and see what I can find. I am not confident I will fond anything. > > > > John G > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
