They match. commit 6af6ac32
cah@snoke:~/rfnoc/src/uhd$ git log -1
commit 6af6ac32c30d2dc0efa6eab61e4a3920649e3e62
Author: Trung Tran <trung.t...@ettus.com>
Date: Fri Aug 3 09:12:55 2018 -0700
examples: add rfnoc_radio_loopback
This example will allow an RF->RF loopback using RFNoC devices.
cah@snoke:~/rfnoc/src/uhd$ cd fpga-src/
cah@snoke:~/rfnoc/src/uhd/fpga-src$ git log -1
commit 6af6ac32c30d2dc0efa6eab61e4a3920649e3e62
Author: Trung Tran <trung.t...@ettus.com>
Date: Fri Aug 3 09:12:55 2018 -0700
examples: add rfnoc_radio_loopback
This example will allow an RF->RF loopback using RFNoC devices.
I want to reiterate i have done nothing but rm -rf the old rfnoc and
.pybombs folders and rerun the pybombs installer.
Corey
On Tue, Oct 9, 2018 at 11:23 AM Marcus Müller <marcus.muel...@ettus.com>
wrote:
> Hey Corey,
>
> yep, when updating your UHD you also need to update your fpga-src
> submodule; `git submodule update`. If you have changes you want to
> preserve: Standard git methods apply; just make a branch in the fpga-
> src submodule to contain your changes, then update the submodule, then
> merge in your branch.
>
> Best regards,
> Marcus
> On Mon, 2018-10-08 at 19:42 -0600, Corey Hahn via USRP-users wrote:
> > I did notice that UHD went from 4.0 to 3.14 is this a problem? Does
> > the getting started wiki need an extra step to choose the
> > branch/commit?
> >
> > On Mon, Oct 8, 2018 at 2:33 PM Rob Kossler <rkoss...@nd.edu> wrote:
> > > Perhaps you are using fpga-src on 'master' rather than on commit
> > > 'ebf5eed' which is the one paired with UHD 'master'?
> > >
> > > Rob
> > >
> > > On Sun, Oct 7, 2018 at 10:22 PM Corey Hahn via USRP-users <
> > > usrp-users@lists.ettus.com> wrote:
> > > > Been using uhd/rfnoc for 9 months now with no comparability
> > > > problems i couldn't fix.
> > > > My last devel version was from the beginning of June.
> > > > Upgraded rfnoc and rebuilt from scratch the pybombs rfnoc
> > > > packages via the getting started wiki.
> > > > I have an x310 USRP
> > > > Redid the place and route with the new rfnoc build. Now i get
> > > > the dreaded comparability mismatch. In the past this was fixed
> > > > because i built the bit file or ran with uhd of two different
> > > > versions. This is on one machine and should not have this
> > > > problem. Where do i start debugging this problem?
> > > >
> > > > root@optical-cuda1604-20181007-srn21:~/rfnoc# uhd_usrp_probe
> > > > [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
> > > > UHD_3.14.0.0-110-g6af6ac32
> > > > [INFO] [X300] X300 initialization sequence...
> > > > Error: RuntimeError: Expected FPGA compatibility number 35, but
> > > > got 36:
> > > > The FPGA image on your device is not compatible with this host
> > > > code build.
> > > > Download the appropriate FPGA images for this version of UHD.
> > > > Please run:
> > > >
> > > > "/root/rfnoc/lib/uhd/utils/uhd_images_downloader.py"
> > > >
> > > > Then burn a new image to the on-board flash storage of your
> > > > USRP X3xx device using the image loader utility. Use this
> > > > command:
> > > >
> > > > "/root/rfnoc/bin/uhd_image_loader" --
> > > > args="type=x300,addr=192.168.40.2"
> > > >
> > > > For more information, refer to the UHD manual:
> > > >
> > > > http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash
> > > > root@optical-cuda1604-20181007-srn21:~/rfnoc#
> > > >
> > > > _______________________________________________
> > > > USRP-users mailing list
> > > > USRP-users@lists.ettus.com
> > > >
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users@lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
