On 10/18/2018 02:51 PM, Farhad Mirkazemi via USRP-users wrote:
Hi,
I have set up my first usrp2 on Ubuntu with its default ip address
(192.168.10.2), with the ethernet ip address 192.168.10.1 and subnet
mask 255.255.255.0 and working with UHD fine; for some reasons, I need
to use a second usrp2 which is with the same image and firmware update
as the first one but when I set a second network with ethernet ip
address 192.168.20.1 and same subnet mask as previous one and then set
the second usrp address to a new one as 192.168.20.2, I receive the
error like no device found ---> empty device address. When I use ping
command, it operates ok with both ethernet networks but unable to
recognize the device. Can you please help!?
Thanks,
So, you have two different ethernet interfaces on your host PC, with the
two USRP2s on them, or a different configuration?
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
