I had a question about the TCXO GPSDO module for the B200/B210. I am interested in using it without a gps lock as a better clock than the tcxo that is internal to the bare board. I am only interested in frequency stability, not time of day. If I did use it in this way, I had a few questions:
1) The spec on it says that it is 75ppb over temperature in unlock condition. That is the only data point I can find about using it unlocked. Do you have any better numbers on what should be expected for frequency stability cold booting the device without ever giving it any gps if I select my reference source as external? 2) Is the ref_locked sensor value for aligning the GPSDO to a gps reference? Can I skip the ref locked check if I am not using gps? 3) I believe I read somewhere that the GPSDO uses the same 10MHz lines as the REF in. What happens if I have a 10Mhz source hooked up while the gpsdo module is installed when I do not have a gps lock? What would happen if a 10Mhz input was hooked up while I did have a gps lock? ________________________________ This message is intended only for the use of the individual or entity to which it is addressed and may contain ZETA Associates confidential or proprietary information. If you are not the intended recipient, any use, dissemination, or distribution of this communication is prohibited. If you have received this communication in error, please notify the sender and delete all copies. _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com