Hi everyone, I am totally to srsLTE.
I am using two computers Ubuntu 16.04 with B210 and Ubuntun 18.04 with
bladeRF.
Here below are the outputs for srsepc, srsenb and srsue,
pi@pi:~/srsLTE/srsenb$ sudo srsenb enb.conf.example
Built in Release mode using commit 429ee90 on branch master.
--- Software Radio Systems LTE eNodeB ---
Reading configuration file enb.conf.example...
[INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_3.14.0.0-release
Opening USRP with args: type=b200,master_clock_rate=30.72e6
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Asking for clock rate 30.720000 MHz...
[INFO] [B200] Actually got clock rate 30.720000 MHz.
Setting frequency: DL=2685.0 Mhz, UL=2565.0 MHz
[INFO] [B200] Asking for clock rate 11.520000 MHz...
[INFO] [B200] Actually got clock rate 11.520000 MHz.
Setting Sampling frequency 11.52 MHz
==== eNodeB started ===
Type <t> to view trace
pi@pi:~/srsLTE/srsepc$ sudo srsepc epc.conf.example
[sudo] password for pi:
Sorry, try again.
[sudo] password for pi:
Built in Release mode using commit 429ee90 on branch master.
--- Software Radio Systems EPC ---
Reading configuration file epc.conf.example...
HSS Initialized.
MME GTP-C Initialized
MME Initialized. MCC: 0xf001, MNC: 0xff01
SP-GW Initialized.
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:001, MNC:01, PLMN: 61712
S1 Setup Request - TAC 7, B-PLMN 0
S1 Setup Request - Paging DRX 2
Sending S1 Setup Response
SCTP Association Shutdown. Association: 88
Deleting eNB context. eNB Id: 0x19b
Releasing UEs context
No UEs to be released
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:001, MNC:01, PLMN: 61712
S1 Setup Request - TAC 7, B-PLMN 0
S1 Setup Request - Paging DRX 2
Sending S1 Setup Response
^CDeleting eNB context. eNB Id: 0x19b
Deleting UE context in HSS. IMSI: 001010123456780
Deleting UE context in HSS. IMSI: 001010123456789
--- exiting ---
pi@pi-ubuntu:~/srsLTE/srsue$ sudo srsue ue.conf.example
Reading configuration file ue.conf.example...
Built in Release mode using commit 429ee901 on branch master.
--- Software Radio Systems LTE UE ---
Opening RF device with 1 RX antennas...
[INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501;
UHD_3.15.0.git-84-g164d76dc
Opening USRP with args:
Error opening UHD: code 11
Opening bladeRF...
Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
Waiting PHY to initialize...
...
Attaching UE...
Searching cell in DL EARFCN=3400, f_dl=2685.0 MHz, f_ul=2565.0 MHz
set RX frequency to 2685000000
set TX frequency to 2565000000
Set RX sampling rate 1.92 Mhz, filter BW: 2.50 Mhz
...
Found Cell: PCI=1, PRB=50, Ports=1, CFO=1.3 KHz
Set RX sampling rate 11.52 Mhz, filter BW: 10.00 Mhz
Found PLMN: Id=00101, TAC=7
Setting PDN protocol to IPv4
Random Access Transmission: seq=19, ra-rnti=0x2
Random Access Transmission: seq=39, ra-rnti=0x2
Random Access Transmission: seq=22, ra-rnti=0x2
Random Access Transmission: seq=6, ra-rnti=0x2
Random Access Transmission: seq=20, ra-rnti=0x2
Random Access Transmission: seq=44, ra-rnti=0x2
Random Access Transmission: seq=11, ra-rnti=0x2
Random Access Transmission: seq=4, ra-rnti=0x2
Random Access Transmission: seq=28, ra-rnti=0x2
Random Access Transmission: seq=50, ra-rnti=0x2
Warning: Detected Radio-Link Failure
Srsue
----------
bladeRF> info
Board: Nuand bladeRF (bladerf1)
Serial #: 54548816f628f3ba6703dc275e26b9d2
VCTCXO DAC calibration: 0x9121
FPGA size: 115 KLE
FPGA loaded: yes
Flash size: 32 Mbit
USB bus: 2
USB address: 20
USB speed: SuperSpeed
Backend: libusb
Instance: 0
bladeRF> version
bladeRF-cli version: 1.7.1-git-1da130cb
libbladeRF version: 2.2.0-git-1da130cb
Firmware version: 2.3.2
FPGA version: 0.8.0 (configured by USB host)
---------------------------------------------------------------------------------------------------------------
srsenb and srsepc
----------------------------
pi@pi:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_3.14.0.0-release
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
_____________________________________________________
/
| Device: B-Series Device
| _____________________________________________________
| /
| | Mboard: B210
| | revision: 4
| | product: 2
| | serial: 3136D68
| | name: MyB210
| | FW Version: 8.0
| | FPGA Version: 16.0
| |
| | Time sources: none, internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: ref_locked
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | _____________________________________________________
| | | /
| | | | RX Frontend: Api@pi-ubuntu:~/srsLTE/build/lib/examples$
./pdsch_ue -i "pdsch.out" -n 10 -r 1234
- PCI: 0
- Nof ports: 1
- CP: Normal
- PRB: 25
- PHICH Length: Normal
- PHICH Resources: 1
- SFN: 0
Decoded MIB. SFN: 0, offset: 0
Tx scheme: Single
nof layers: 1
nof codewords: 1
CFO: +0.00 Hz
RSRP: +49.4 dBm | -inf dBm
SNR: +139.6 dB | -inf dB
Rb: 0.01 / 0.54 / 0.23 Mbps (net/maximum/processing)
PDCCH-Miss: 20.00%
PDSCH-BLER: 25.00%
TB 0: mcs=9; tbs=4008
TB 1: mcs=0; tbs=0
Press enter maximum printing debug log of 1 subframe.
| | | | Name: FE-RX2
| | | | Antennas: TX/RX, RX2
| | | | Sensors: temp, rssi, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: B
| | | | Name: FE-RX1
| | | | Antennas: TX/RX, RX2
| | | | Sensors: temp, rssi, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: B210 RX dual ADC
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | TX DSP: 1
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | _____________________________________________________
| | | /
| | | | TX Frontend: A
| | | | Name: FE-TX2
| | | | Antennas: TX/RX
| | | | Sensors: temp, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: B
| | | | Name: FE-TX1
| | | | Antennas: TX/RX
| | | | Sensors: temp, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: B210 TX dual DAC
| | | | Gain Elements: None
In addition, I run this command:
pi@pi-ubuntu:~/srsLTE/build/lib/examples$ ./pdsch_ue -i "pdsch.out" -n 10
-r 1234
- PCI: 0
- Nof ports: 1
- CP: Normal
- PRB: 25
- PHICH Length: Normal
- PHICH Resources: 1
- SFN: 0
Decoded MIB. SFN: 0, offset: 0
Tx scheme: Single
nof layers: 1
nof codewords: 1
CFO: +0.00 Hz
RSRP: +49.4 dBm | -inf dBm
SNR: +139.6 dB | -inf dB
Rb: 0.01 / 0.54 / 0.23 Mbps (net/maximum/processing)
PDCCH-Miss: 20.00%
PDSCH-BLER: 25.00%
TB 0: mcs=9; tbs=4008
TB 1: mcs=0; tbs=0
Press enter maximum printing debug log of 1 subframe.
Additonal Information:
Is it necessary to install for both computers to use UHD LTS 3.9.0 version?
This command was run on the ubtunu 18.04 with the bladeRF, I would to ask
if it the model of the bladeRF I am using is x115? I also using wanna know
how to rectify PDSCH-BLER, it looks there is a lot of errors. I apologise
for the handful of questions but I stuck at the moment. Hope anyone can
advise me with the steps to approach this question, with commands will be
much clearer for me. Thanks in advance :)
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
