Also Ramazan note that even then you will still get far reduced bandwidth as compared to N210/B210 over ethernet or USB: http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2015-April/041697.html [1] If cutting FPGA code isn't an option but you wish to have a larger bandwidth with the small form-factor, perhaps something like the B200 mini might suffice?----- Original Message -----From: "Jason Matusiak" To:"usrp-users@lists.ettus.com" , "Ramazan Çetin" Cc: Sent:Wed, 8 May 2019 14:14:46 +0000 Subject:Re: [USRP-users] Running E310 in Network Mode
See here: https://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_network_mode [2] ------------------------- FROM: USRP-users on behalf of Ramazan Çetin via USRP-users SENT: Wednesday, May 8, 2019 8:02 AM TO: Ettus Research Support; usrp-users@lists.ettus.com SUBJECT: [USRP-users] Running E310 in Network Mode Hello, We want to run USRP E310 in network mode. I think the samples coming from FPGA passing through CPU before sending to network. This decreases bandwidth because of CPU limitations. So, is there any ettus image or suggestions that we can run E310 directly from FPGA to network without speed limitations? (like N210 or B210) Best regards. Ramazan _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com [3] Links: ------ [1] http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2015-April/041697.html [2] https://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_network_mode [3] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
