Hello, I'm a little confused about how I should distinguish between two different USRPs X300's and the two different motherboards per USRP X300 in this type of setup. I am feeding a 10 MHz ref and PPS ref to both USRPs. What I have right now is a gr flowgraph with a single USRP Sink block that I have configured with the following device address
"addr0=192.168.10.2,addr1=192.168.11.2" and I have selected Num Mboards = 2 Num Channels = 2 But this setup only uses the addr0=192.168.10.2 USRP to receive on both RFA and RFB ports. I would like to configure receiving on 192.168.10.2 RFA TX/RX and 192.168.11.2 RFA TX/RX. How do I configure this properly?
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com