Hi Daniel, This error points to a failure of reading the internal EEPROM. The X310 will need to be RMA'd. I will follow up with you off list to RMA the device.
Regards, Nate Temple On Wed, Oct 30, 2019 at 6:21 AM Neunteufel, Daniel via USRP-users < [email protected]> wrote: > Hi all, > > > I'm working with three X310 with TwinRX daughterboards. I tried the latest > UHD 3.15 with the according v36 XG FPGA image. As I encountered problems > with DPDK support in this UHD version, I went back to the latest stable > release 3.14.1.1, which solved this problem. > > > Downgrading the X310 FPGA images to v35 (necessary for 3.14.1.1) worked > like a charm on two of the devices, however, for one *uhd_image_loader* > terminated with > "*Error: RuntimeError: Device reported an error during initialization.*". > > > I loaded the desired image into volatile memory via JTAG using Vivado. > Doing so, I'm able to use the device with UHD 3.14.1.1 until power > cycling. The* uhd_image_loader *still does not work, causing the same > error message. Using the HG image doesn't help, either. > > > The problem is very similar to the one described here, but unfortunately > the solution seems to be off-list: > > > http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2016-October/050028.html > > > > Any help highly appreciated. > Thanks, > Daniel > > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
