The problem was I had not changed the ARCH to zynq in viv_sim_preamble.mak - it was still at kintex7. For some reason this worked with 3.14 (Viv 2017.4). Thanks for your help. Rob
On Thu, Feb 20, 2020 at 10:48 PM Jonathon Pendlum < jonathon.pend...@ettus.com> wrote: > Try removing all xml files you have in your OOT IP directory. > > On Thu, Feb 20, 2020 at 10:22 PM Rob Kossler via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Unfortunately, I already tried that but no luck. >> >> On Thu, Feb 20, 2020 at 9:54 PM Nick Foster <bistrom...@gmail.com> wrote: >> >>> >>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/ >>> >>> Wipe that whole directory and try it again. If you want to be selective >>> and save some time you can wipe only the axi_mem_64k directory. >>> >>> On Thu, Feb 20, 2020 at 6:13 PM Rob Kossler via USRP-users < >>> usrp-users@lists.ettus.com> wrote: >>> >>>> Hi, >>>> I am having a problem with a Block Memory Generator IP that is working >>>> with 2017.4 but is giving me issues with 2018.3. I have tried to upgrade >>>> the IP as well as re-creating the IP from scratch in 2018.3, but I still >>>> get the same failure (see below). I have attached the IP created from >>>> scratch in 2018.3. Any suggestions? I am not very experienced with FPGA >>>> development in general or Vivado specifically, so it is likely that I am >>>> missing something obvious. >>>> >>>> By the way, I am using the webpack (free) version of Vivado and >>>> attempting to build for the E310. >>>> >>>> Rob >>>> >>>> >>>> kossler@kossler-ThinkPad-P51:~/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb$ >>>> make xsim >>>> BUILDER: Checking tools... >>>> * GNU bash, version 4.4.20(1)-release (x86_64-pc-linux-gnu) >>>> * Python 2.7.17 >>>> * Vivado v2018.3 (64-bit) >>>> ======================================================== >>>> BUILDER: Building IP axi_mem_64k >>>> ======================================================== >>>> BUILDER: Staging IP in build directory... >>>> BUILDER: Reserving IP location: >>>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/xc7z020clg484-3/axi_mem_64k >>>> BUILDER: Retargeting IP to part kintex7/xc7z020/clg484/-3... >>>> BUILDER: Building IP... >>>> [00:00:00] Executing command: vivado -mode batch -source >>>> /home/kossler/uhd/UHD-3.15/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl >>>> -log axi_mem_64k.log -nojournal >>>> WARNING: [IP_Flow 19-2162] IP 'axi_mem_64k' is locked: >>>> CRITICAL WARNING: [filemgmt 20-1366] Unable to reset target(s) for the >>>> following file is locked: >>>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/xc7z020clg484-3/axi_mem_64k/axi_mem_64k.xci >>>> CRITICAL WARNING: [filemgmt 20-1365] Unable to generate target(s) for >>>> the following file is locked: >>>> /home/kossler/nd_overhaul/uhd_nd/rfnoc/testbenches/noc_block_txarb_tb/build-ip/xc7z020clg484-3/axi_mem_64k/axi_mem_64k.xci >>>> >>> _______________________________________________ >>>> USRP-users mailing list >>>> USRP-users@lists.ettus.com >>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>>> >>> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
