Hi Rigiel - At least in theory both the Bladerf XA4 and USRP B210 provide external input for a 10 MHz REF, which -might- allow for some sense of synchronization between them. It's really not clear to me whether that will be enough, and whether the software controlling these devices can be coerced into producing even vaguely time-aligned samples based on the common REF signal. Maybe others here have used this particular combination of SDR hardware in a synchronized manner? Good luck! - MLD
On Mon, Oct 5, 2020 at 2:37 AM Anes Rose Rigiel Anony via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi Team, > > We are using *Bladerf XA4 as Base station 1 and USRP B210 as Base Station > 2*. Since both devices use an internal clock as the clock source, both > are *not in sync* so our application fails. > > I need to sync these both devices. > > *Is there any way to synchronize without an external clock and with an > external clock?* > > Please share the detailed information on this. > > -- > Regards, > Rigiel, > Cellular. > > Disclaimer:This message is intended only for the designated recipient(s). > It may contain confidential or proprietary information and may be subject > to other confidentiality protections. If you are not a designated > recipient, you may not review, copy or distribute this message. Please > notify the sender by e-mail and delete this message. GlobalEdge does not > accept any liability for virus infected mails. > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
