I am attempting to build PetaLinux targeting the E320. As there is no BSP (that
I can find) for the E320, I have attempted to generate a hardware description
file from the Vivado project that can be created from the Ettus FPGA github
repository<https://github.com/EttusResearch/fpga>.
I successfully created the Vivado project by running make E320_1G GUI=1, ran
synthesis and implementation and then exported the .hdf. I then configured the
PetaLinux project:
petalinux-config -get-hw-description=<path_to_.hdf>
And attempted to build it:
petalinux-build
It is during this build stage that I get the following error:
NOTE: Executing RunQueue Tasks
ERROR: fsbl-2018.3+gitAUTOINC+56f3da2afb-r0 do_configure: Function failed:
do_configure (log file is located at
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/temp/log.do_configure.18082)
ERROR: Logfile of failure stored in:
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/temp/log.do_configure.18082
Log data follows:
| DEBUG: Executing shell function do_configure
| MISC_ARG is -yamlconf
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/fsbl.yaml
| APP_ARG is -app "Zynq FSBL"
| Using xsct from: /opt/Xilinx/PetaLinux/2018.3/tools/xsct/SDK/2018.3/bin/xsct
| cmd is: xsct -sdx -nodisp
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/app.tcl
-ws
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/build
-pname fsbl -rp
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/git
-processor ps7_cortexa9_0 -hdf
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/deploy/images/plnx-zynq7/Xilinx-plnx-zynq7.hdf
-arch 32 -app "Zynq FSBL" -yamlconf
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/fsbl.yaml
| INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds
| Opening the hardware design, this may take few seconds.
| expected integer but got ""
| ERROR: [Hsi 55-1545] Problem running tcl command ::sw_scugic_v3_10::generate
: expected integer but got ""
| while executing
| "format "#define XPAR_FABRIC_%s_%s_INTR %d$uSuffix" [string toupper
$ip_name] [string toupper $port_name] $port_intr_id"
| ("foreach" body line 86)
| invoked from within
| "foreach periph $periphs {
|
| # get the gic mode information
| set scugic_mode [common::get_property CONFIG.C_IRQ_F2P_MODE $periph]
|
| ..."
| (procedure "xdefine_gic_params" line 30)
| invoked from within
| "xdefine_gic_params $drv_handle"
| (procedure "::sw_scugic_v3_10::generate" line 10)
| invoked from within
| "::sw_scugic_v3_10::generate ps7_scugic_0"
| ERROR: [Hsi 55-1442] Error(s) while running TCL procedure generate()
| Failed to generate the platform.
| Reason: Failed to generate the bsp sources for domain.fsbl_domain
| while executing
| "builtin_platform -generate quick"
| (procedure "platform" line 221)
| invoked from within
| "platform generate -quick"
| invoked from within
| "if { $params(ws) ne "" } {
| #Local Work Space available
| if { $params(pname) ne "" } {
| # hwpname/bspname is empty then default it to
pname+_hwproj/b..."
| (file
"/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/app.tcl"
line 139)
| WARNING:
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/temp/run.do_configure.18082:1
exit 1 from 'xsct -sdx -nodisp
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/app.tcl
-ws
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/build
-pname fsbl -rp
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/git
-processor ps7_cortexa9_0 -hdf
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/deploy/images/plnx-zynq7/Xilinx-plnx-zynq7.hdf
-arch 32 -app "Zynq FSBL" -yamlconf
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/fsbl.yaml'
| ERROR: Function failed: do_configure (log file is located at
/home/devel/Projects/e320/plnx-2018.3-e320/build/tmp/work/plnx_zynq7-xilinx-linux-gnueabi/fsbl/2018.3+gitAUTOINC+56f3da2afb-r0/temp/log.do_configure.18082)
ERROR: Task
(/opt/Xilinx/PetaLinux/2018.3/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/fsbl/fsbl_git.bb:do_configure)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 2999 tasks of which 2234 didn't need to be rerun
and 1 failed.
Summary: 1 task failed:
/opt/Xilinx/PetaLinux/2018.3/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/fsbl/fsbl_git.bb:do_configure
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
ERROR: Failed to build project
The build fails when attempting to configure the first stage bootloader.
I have also attempted to create an FSBL directly through the SDK however that
gives a very similar error:
9:43:04 INFO : Registering command handlers for SDK TCF services
09:43:05 INFO : Launching XSCT server: xsct -n -interactive
/home/devel/Projects/e320/fsbl-2018.3/temp_xsdb_launch_script.tcl
09:43:10 INFO : XSCT server has started successfully.
09:43:10 INFO : Successfully done setting XSCT server connection channel
09:43:11 INFO : Successfully done setting SDK workspace
09:44:54 INFO : Project 'fsbl' created. You can now create BSPs and
application projects targeting this hardware platform.
09:45:21 ERROR : (XSDB Server)ERROR: [Hsi 55-1545] Problem running tcl command
::sw_scugic_v3_10::generate : expected integer but got ""
while executing
"format "#define XPAR_FABRIC_%s_%s_INTR %d$uSuffix" [string toupper $ip_name]
[string toupper $port_name] $port_intr_id"
("foreach" body line 86)
invoked from within
"foreach periph $periphs {
# get the gic mode information
set scugic_mode [common::get_property CONFIG.C_IRQ_F2P_MODE $periph]
..."
(procedure "xdefine_gic_params" line 30)
invoked from within
"xdefine_gic_params $drv_handle"
(procedure "::sw_scugic_v3_10::generate" line 10)
invoked from within
"::sw_scugic_v3_10::generate ps7_scugic_0"
09:45:21 ERROR : (XSDB Server)ERROR: [Hsi 55-1442] Error(s) while running TCL
procedure generate()
09:45:21 ERROR : (XSDB Server)ERROR: [Hsi 55-1450] Error: running generate_bsp.
09:45:21 ERROR : Error generating bsp sources: Failed in generating sources
I have not changed anything in the default vivado project that is generated.
I have circumvented building the FSBL for the time being by disabling it in the
petalinux-config top level menu, however I would ideally like to be able to
build it!
I am very new to FPGA development and this is my first foray into using the
Xilinx tools and PetaLinux, so any help would be appreciated.
Thanks,
Ben
________________________________________
Roke Manor Research Limited, Romsey, Hampshire, SO51 0ZN, United Kingdom.Part
of the Chemring Group.
Registered in England & Wales. Registered No: 00267550
http://www.roke.co.uk
_______________________________________
The information contained in this e-mail and any attachments is proprietary to
Roke Manor Research Limited and
must not be passed to any third party without permission. This communication is
for information only and shall
not create or change any contractual relationship.
________________________________________
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
