Dear Rob and Marcus, Thank you for your response. I have a follow up question. Since I do not have an RF power splitter at hand for the external LO source, do you think it is fine to use a 1-to-2 SMA cable to connect an N210's output port to N310's TX and RX External LO ports? Thanks again.
Best regards, Hua On Thu, May 6, 2021 at 10:58 PM Marcus D Leech <[email protected]> wrote: > This should work. Keep in mind that the mixers in the N310 are 2XLO so the > external LO has to be at twice the desired tuned frequency. > > Sent from my iPhone > > > On May 6, 2021, at 10:31 PM, Zeng, Huacheng <[email protected]> > wrote: > > > > > > Hello, > > > > I want to use an external LO for N310. I learned that a common case is > to use a signal generator to produce the external LO and feed it to N310. > Since I do not have a signal generator at the moment, I was wondering if it > is okay to use an N210 to generate the external LO for N310. I will adjust > the Tx gain of N210 so that the output power is in the range of 0 to 6 dBm. > > > > Regards, > > Hua > > _______________________________________________ > > USRP-users mailing list -- [email protected] > > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
