I have a E320 that I wanted to update to UHD 4.0. I am currently at 3.15. I downloaded the mender artifact and image from files.ettus.com.
I first tried to mend it. I scp'd it and attempted it. The following is the result from that. root@ni-e320-31DCD15:~# mender -rootfs /home/root/usrp_e320_fs.mender INFO[0000] Configuration file does not exist: /var/lib/mender/mender.conf module=config INFO[0000] Loaded configuration file: /etc/mender/mender.conf module=config INFO[0000] Mender running on partition: /dev/mmcblk0p3 module=main INFO[0000] Start updating from local image file: [/home/root/usrp_e320_fs.mender] module=rootfs Installing update from the artifact of size 89829376 INFO[0000] no public key was provided for authenticating the artifact module=installer ERRO[0000] Installation failed: installer: failed to read and install update: will not install artifact with state-scripts when installing from cmd-line. Use -f to override module=rootfs ERRO[0000] installer: failed to read and install update: will not install artifact with state-scripts when installing from cmd-line. Use -f to override module=main root@ni-e320-31DCD15:~# During this process, during the scp I noticed that it complained about the disk being full. I am using a 16 GB sd card (actually the one that came with it) and there is nothing extra on it other than the standard UHD 3.15 etc. Thinking that might be an issue I decided to try popping the cover and building a new 16 GB card from scratch using the image I downloaded. After doing: jplong@mm241897-pc:~/proj/ettus_e320/e3xx_e320_sdimg_default-v4.0.0.0$<mailto:jplong@mm241897-pc:~/proj/ettus_e320/e3xx_e320_sdimg_default-v4.0.0.0$> sudo dd if=usrp_e320_fs.sdimg of=/dev/sda bs=1M dd: error writing '/dev/sda': No space left on device 14773+0 records in 14772+0 records out 15489564672 bytes (15 GB, 14 GiB) copied, 1904.36 s, 8.1 MB/s jplong@mm241897-pc:~/proj/ettus_e320/e3xx_e320_sdimg_default-v4.0.0.0$<mailto:jplong@mm241897-pc:~/proj/ettus_e320/e3xx_e320_sdimg_default-v4.0.0.0$> When I tried to boot this popped up so that is probably no good based on it running out of space: [FAILED] Failed to start File System Check on /dev/mmcblk0p4. Then it went into emergency mode. Does UHD 4.0 require a bigger disk? Thanks Jeff Long
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
