Hi Maria, In your message you do not specify what kind of device you have. What I am bout to say is referencing to an X310 device.
The theoretical throughput between RFNoc Blocks in this device, if I am not very much mistaken, should be determined by the ce_clk frequency. If you look inside x300.v you can see that the ce_clk is 214.286 MHz, so you should be able to reach a theoretical throughput 214 Msps between nocblocks. I think, but I not shure because I never tried it, that this throughput is per nocblock port, so if you have a nocblock with 2 ports you should be able to reach the theoretical throughput of 214*2 Msps. Have a good day Paolo On 5/13/21 10:28 AM, Maria Muñoz wrote: > Hi all, > > I'm trying to size/calculate the throughput between RFNoC blocks from > the FPGA side (not between arm/host pc and RFNoC block, which I think > is the one the interface measure when performing uhd_usrp_probe). Is > there a process or an existing tool to measure this throughput? > > Kind Regards, > > Maria > > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected]
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
