On 4/1/22 08:40, Rob Kossler wrote:
Hi,
I am trying to copy some large files (~500MB) from the N310 to the host.
The transfer rate I get using scp or sshfs (mounting in either
direction) is about 12MB/s. Given that the interface itself can do
>100MB/s, I'm wondering if there is a faster method. One thing I tried
was to setup a RAM file system on both the N310 and the host and copy
from one RAM file system to the other. But, still no better than 12
MB/s. Any ideas on faster transfers?
Rob
[balister@mini ~]$ iperf3 -c 192.168.11.152 -p 7575 -bidir
Connecting to host 192.168.11.152, port 7575
[ 5] local 192.168.11.139 port 55352 connected to 192.168.11.152 port 7575
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 81.5 MBytes 684 Mbits/sec 32 639 KBytes
[ 5] 1.00-2.00 sec 77.5 MBytes 650 Mbits/sec 0 728 KBytes
[ 5] 2.00-3.00 sec 78.8 MBytes 661 Mbits/sec 5 595 KBytes
[ 5] 3.00-4.00 sec 78.8 MBytes 661 Mbits/sec 0 687 KBytes
[ 5] 4.00-5.00 sec 77.5 MBytes 650 Mbits/sec 13 553 KBytes
[ 5] 5.00-6.00 sec 78.8 MBytes 661 Mbits/sec 0 655 KBytes
[ 5] 6.00-7.00 sec 78.8 MBytes 661 Mbits/sec 0 740 KBytes
[ 5] 7.00-8.00 sec 77.5 MBytes 650 Mbits/sec 28 604 KBytes
[ 5] 8.00-9.00 sec 78.8 MBytes 661 Mbits/sec 0 699 KBytes
[ 5] 9.00-10.00 sec 77.5 MBytes 650 Mbits/sec 26 553 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 785 MBytes 659 Mbits/sec 104 sender
[ 5] 0.00-10.01 sec 783 MBytes 656 Mbits/sec
receiver
iperf Done.
[balister@mini ~]$
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
