On 15/02/2023 18:12, Marcus Müller wrote:
Hi,
On 15.02.23 18:22, Marcus D. Leech wrote:
*
*
2)Is UHD able to be run on an Android device and control a USRP
SDR (using USB OTG, for example)? If not, are there other ways
to have an Androidapp control the USRP SDR in real time?
There is no port of UHD to Android that I know of.
There is one – at the very least the one done by Basti Bloessl for his
GNU Radio on Android work. I also think Tom Rondeau had something
similar demoed before, but that is so long ago that I'd neither trust
my memory nor assume it's still useful.
I should qualify my statement with "and is supported by Ettus/NI". The
one Tom did was I think nearly a decade ago. I don't know
about the Basti Bloessl one, but I'll observe that the last commit on
his "gnuradio-android" was 2 years ago...
*
3) Custom B200 firmware: if I program the FPGA over USB (using
Xilinx HW manager), will the image persist if I turnoff power to
device (I.e.disconnect USB)? In other words, is there a FLASH or
some other persistent storage on-board to hold on to
user-defined FPGA firmware after power-down?
There's insufficient FLASH onboard the B2xx devices to support a
persistent FPGA image.
Corollary: short of leading to electrical damage somehow, it's hard to
permanently brick that device.
Best regards,
Marcus
_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com