Hi All,
I am using Ettus B210 for a 5G test bench project. It is not showing proper
output waveforms for Terminal DFT/FFT testing.
Also, when I use USRP B210 as OAI gNB, I am seeing few "U" and "L". What could
be reason for this performance issue?
My setup is:
HOST: Intel i7, 8 core, 8GB Ram
* Ubuntu 18.04 LTS, Low latency kernel 4.15.0
* UHD 4.3.0
* USRP B210 with LP0965 Antenna, USB 3.0
* Operating in 3.6192 GHz with 46.080000MSps(TX/RX)
Kindly help me.
Regards,
Anil
[Ltts.com]
L&T Technology Services Ltd
www.LTTS.com
L&T Technology Services Limited (LTTS) is committed to safeguard your privacy.
Read the appropriate privacy
notice<https://www.ltts.com/privacy-policies-notices> applicable to you to know
more about how LTTS collects, uses and stores your personal data. Please visit
our privacy policy<https://www.ltts.com/data-privacy-policy> available on our
website www.Ltts.com for more information about our commitment towards data
privacy under applicable data protection laws. This email may contain
confidential or privileged information for the intended recipient(s). If you
are not the intended recipient, please do not use or disseminate the
information, notify the sender and delete it from your system.
admins@MYTSP00192:/usr/local/lib/uhd/examples$
admins@MYTSP00192:/usr/local/lib/uhd/examples$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.3.0.HEAD-0-g1f8fd345
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
_____________________________________________________
/
| Device: B-Series Device
| _____________________________________________________
| /
| | Mboard: B210
| | serial: 3129021
| | name: MyB210
| | product: 2
| | revision: 4
| | FW Version: 8.0
| | FPGA Version: 16.0
| |
| | Time sources: none, internal, external, gpsdo
| | Clock sources: internal, external, gpsdo
| | Sensors: ref_locked
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | _____________________________________________________
| | | /
| | | | RX Frontend: A
| | | | Name: FE-RX2
| | | | Antennas: TX/RX, RX2
| | | | Sensors: temp, rssi, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Frontend: B
| | | | Name: FE-RX1
| | | | Antennas: TX/RX, RX2
| | | | Sensors: temp, rssi, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: B210 RX dual ADC
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | TX DSP: 1
| | |
| | | Freq range: -8.000 to 8.000 MHz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | _____________________________________________________
| | | /
| | | | TX Frontend: A
| | | | Name: FE-TX2
| | | | Antennas: TX/RX
| | | | Sensors: temp, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Frontend: B
| | | | Name: FE-TX1
| | | | Antennas: TX/RX
| | | | Sensors: temp, lo_locked
| | | | Freq range: 50.000 to 6000.000 MHz
| | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB
| | | | Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: B210 TX dual DAC
| | | | Gain Elements: None
admins@MYTSP00192:/usr/local/lib/uhd/examples$ uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.3.0.HEAD-0-g1f8fd345
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial: 3129021
name: MyB210
product: B210
type: b200
admins@MYTSP00192:/usr/local/lib/uhd/examples$ ./benchmark_rate --rx_rate 10e6
--tx_rate 10e6
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.3.0.HEAD-0-g1f8fd345
[00:00:00.000717] Creating the usrp device with: ...
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
Using Device: Single USRP:
Device: B-Series Device
Mboard 0: B210
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: FE-RX2
RX Channel: 1
RX DSP: 1
RX Dboard: A
RX Subdev: FE-RX1
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: FE-TX2
TX Channel: 1
TX DSP: 1
TX Dboard: A
TX Subdev: FE-TX1
[00:00:02.198928523] Setting device timestamp to 0...
[INFO] [B200] Asking for clock rate 40.000000 MHz...
[INFO] [B200] Actually got clock rate 40.000000 MHz.
[00:00:02.590436745] Testing receive rate 10.000000 Msps on 1 channels
Setting TX spp to 2040
[00:00:02.612475059] Testing transmit rate 10.000000 Msps on 1 channels
UUUO[00:00:12.619242716] Benchmark complete.
Benchmark rate summary:
Num received samples: 100148584
Num dropped samples: 71364
Num overruns detected: 1
Num transmitted samples: 99974280
Num sequence errors (Tx): 0
Num sequence errors (Rx): 0
Num underruns detected: 3
Num late commands: 0
Num timeouts (Tx): 0
Num timeouts (Rx): 0
Done!
admins@MYTSP00192:/usr/local/lib/uhd/examples$ sudo ./rx_samples_to_file --freq
98e6 --rate 5e6 --gain 20 --duration 10 usrp_samples.dat
[sudo] password for admins:
Creating the usrp device with: ...
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.3.0.HEAD-0-g1f8fd345
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
Using Device: Single USRP:
Device: B-Series Device
Mboard 0: B210
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: FE-RX2
RX Channel: 1
RX DSP: 1
RX Dboard: A
RX Subdev: FE-RX1
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: FE-TX2
TX Channel: 1
TX DSP: 1
TX Dboard: A
TX Subdev: FE-TX1
Setting RX Rate: 5.000000 Msps...
[INFO] [B200] Asking for clock rate 40.000000 MHz...
[INFO] [B200] Actually got clock rate 40.000000 MHz.
Actual RX Rate: 5.000000 Msps...
Setting RX Freq: 98.000000 MHz...
Setting RX LO Offset: 0.000000 MHz...
Actual RX Freq: 98.000000 MHz...
Setting RX Gain: 20.000000 dB...
Actual RX Gain: 20.000000 dB...
Waiting for "lo_locked": ++++++++++ locked.
Press Ctrl + C to stop streaming...
Done!
admins@MYTSP00192:/usr/local/lib/uhd/examples$ ls -al usrp_samples.dat
-rw-r--r-- 1 root root 200000000 Oct 30 10:06 usrp_samples.dat
admins@MYTSP00192:/usr/local/lib/uhd/examples$ sudo ./tx_samples_from_file
--freq 915e6 --rate 5e6 --gain 10 usrp_samples.dat
Creating the usrp device with: ...
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.3.0.HEAD-0-g1f8fd345
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
Using Device: Single USRP:
Device: B-Series Device
Mboard 0: B210
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: FE-RX2
RX Channel: 1
RX DSP: 1
RX Dboard: A
RX Subdev: FE-RX1
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: FE-TX2
TX Channel: 1
TX DSP: 1
TX Dboard: A
TX Subdev: FE-TX1
Setting TX Rate: 5.000000 Msps...
[INFO] [B200] Asking for clock rate 40.000000 MHz...
[INFO] [B200] Actually got clock rate 40.000000 MHz.
Actual TX Rate: 5.000000 Msps...
Setting TX Freq: 915.000000 MHz...
Setting TX LO Offset: 0.000000 MHz...
Actual TX Freq: 915.000000 MHz...
Setting TX Gain: 10.000000 dB...
Actual TX Gain: 10.000000 dB...
Checking TX: LO: locked ...
Done!
Uadmins@MYTSP00192:/usr/local/lib/uhd/examples$ sudo ./rx_ascii_art_dft --freq
98e6 --rate 5e6 --gain 20 --bw 5e6 --ref-lvl -30
Creating the usrp device with: ...
[INFO] [UHD] linux; GNU C++ version 7.5.0; Boost_106501;
UHD_4.3.0.HEAD-0-g1f8fd345
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
Using Device: Single USRP:
Device: B-Series Device
Mboard 0: B210
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: FE-RX2
RX Channel: 1
RX DSP: 1
RX Dboard: A
RX Subdev: FE-RX1
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: FE-TX2
TX Channel: 1
TX DSP: 1
TX Dboard: A
TX Subdev: FE-TX1
Setting RX Rate: 5.000000 Msps...
[INFO] [B200] Asking for clock rate 40.000000 MHz...
[INFO] [B200] Actually got clock rate 40.000000 MHz.
Actual RX Rate: 5.000000 Msps...
Setting RX Freq: 98.000000 MHz...
Actual RX Freq: 98.000000 MHz...
Setting RX Gain: 20.000000 dB...
Actual RX Gain: 20.000000 dB...
Setting RX Bandwidth: 5.000000 MHz...
Actual RX Bandwidth: 5.000000 MHz...
Checking RX: LO: locked ...
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
