I tried the command without use_dpdk=1, and it worked fine(aside from the underflows and dropped samples) - if that is what you mean by side-step.
If I specify the type/product(and set use_dpdk=1), I still get errors. `./benchmark_rate --rx_rate 491.52e6 --rx_channels 0 --tx_rate 491.52e6 --tx_channels 0 --args "addr=192.168.10.2,mgmt_addr=192.168.1.254,use_dpdk=1,type=x4xx,product=x410"` `[INFO] [UHD] linux; GNU C++ version 9.4.0; Boost_107100; DPDK_19.11; UHD_4.5.0.main-2-ga7657c80` `[WARNING] [PREFS] Loaded config from /root/.uhd. This location is considered deprecated, consider moving your config file to /root/.config instead.` `EAL: Detected 32 lcore(s)` `EAL: Detected 1 NUMA nodes` `EAL: Multi-process socket /var/run/dpdk/rte/mp_socket` `EAL: Selected IOVA mode 'PA'` `EAL: No available hugepages reported in hugepages-1048576kB` `EAL: Probing VFIO support...` `EAL: VFIO support initialized` `EAL: PCI device 0000:06:00.0 on NUMA socket -1` `EAL: probe driver: 15b3:1017 net_mlx5` `EAL: PCI device 0000:06:00.1 on NUMA socket -1` `EAL: probe driver: 15b3:1017 net_mlx5` `[00:00:00.000209] Creating the usrp device with: addr=192.168.10.2,mgmt_addr=192.168.1.254,use_dpdk=1,type=x4xx,product=x410...` `Error: LookupError: KeyError: No devices found for ----->` `Device Address:` ` addr: 192.168.10.2` ` mgmt_addr: 192.168.1.254` ` use_dpdk: 1` ` type: x4xx` ` product: x410`
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
