Long story short: That will be excessively hard, and I don't see any chance of you
achieving lower latency than gr-ieee802-11 [1], which is not *quite* fast enough for an
access point, because you would need your USRP to react with ACK packages faster than the
USB and host software latency allows.
So, what you want is impossible.
> please help me to give some document to how to convert USRP as an access
point.
To the best of my knowledge, no such thing exists. You can use gr-ieee802-11 to use a B210
in a slightly non-standard adhoc network mode, but not as an Access Point. This is not a
limitation of gr-ieee-802-11, but simply of the fact that the wifi standard requires
reaction times faster than you can physically achieve.
Best regards,
Marcus
[1] https://github.com/bastibl/gr-ieee802-11/
On 27.12.23 11:39, Sivanesh Kumar K via USRP-users wrote:
Hi team,
I need to convert USRP b210 to access point to broadcast as a wifi signal withich is
connected to 5G core via N3iwf.
please help me to give some document to how to convert USRP as an access point.
Regards,
Sivaneshkumar K
Mobiveil INC., CONFIDENTIALITY NOTICE: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and may contain proprietary
confidential or privileged information or otherwise be protected by law. Any
unauthorized review, use, disclosure or distribution is prohibited. If you are not the
intended recipient, please notify the sender and destroy all copies and the original
message.
_______________________________________________
USRP-users mailing list [email protected]
To unsubscribe send an email [email protected]
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
