Hi, Any first run of a UHD application will upload the B210 firmware!
The B210 should be identified as "2500:0020 Ettus Research LLC USRP B210" from "lsusb" after the firmware upload via the Cypress WestBridge USB data transfer is done. ---- There is a high possibility that the firmware image for the B210 is not loaded or could not be loaded onto your device. Please check the firmware folder by running: "ls /usr/local/share/uhd/images" (Note: The path may differ on your system.) If the firmware folder is empty, please run the command: "sudo uhd_images_downloader" at least once before using any UHD commands, such as "sudo uhd_find_devices", "sudo uhd_usrp_probe", or your UHD application. Best regards, Matthias ________________________________ Von: [email protected] <[email protected]> Gesendet: Dienstag, 4. Februar 2025 15:45:07 An: [email protected] Betreff: [USRP-users] Re: B210 not seen by uhd_find_devices command Hello Marcus, the output of “lsusb“ is: Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 002: ID 2500:0020 Cypress WestBridge Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 008: ID 0b1f:03ee Insyde Software Corp. Bus 001 Device 007: ID 0557:9241 ATEN International Co., Ltd Bus 001 Device 006: ID 1d6b:0107 Linux Foundation USB Virtual Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub where the B210 is identified as Cypress WestBridge.
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
