Hi!
When you see the error “(…) Artifact Payload type 'rootfs-image' is not
supported by this Mender Client. (…)” then you edit /data/mender/mender.conf
and set the following content:
{\
"RootfsPartA": "/dev/mmcblk0p2",\
"RootfsPartB": "/dev/mmcblk0p3"\
}
Then you should be able to run the mender update to UHD 4.8.
If it still does not work, another option would be to expose the eMMC as mass
storage device to the host PC and flash it from there (similar as you would
flash an image to a USB stick). This is described here:
https://files.ettus.com/manual/page_usrp_x4xx.html#x4xx_accessing_emmc_usb
Kind regards,\
Jörg
_______________________________________________
USRP-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
