Kevin, are you specifying enable_fc=0 in the stream args or not? In the debug statement above, they're shown, but not in your last email. I'm asking because it looks like FC is kicking in and stopping the stream.
--M On Wed, Jul 23, 2025 at 3:20 PM Kevin Williams <[email protected]> wrote: > Hi Nikos, > > > > They are: > dest_addr=172.17.0.2,dest_mac_addr=02:42:ac:11:00:02,dest_port=1234,stream_mode=full_packet > > > > Kind regards, Kevin > > > > *From:* Nikos Balkanas <[email protected]> > *Sent:* Wednesday, 23 July 2025 15:15 > *To:* Kevin Williams <[email protected]> > *Cc:* [email protected] > *Subject:* [EXTERNAL]Re: [USRP-users] remote streaming starts, but stops > after a few packets received > > > > Hi Kevin, > > > > What are your stream_args? > > Using UHD_STREAM_MODE_NUM_SAMPS_AND_DONE? > > Not using RFNOC, but full_packet is not a UHD 4.6 mode:( > > > > BR, > > nikos > > > > On Wed, Jul 23, 2025 at 3:14 PM Kevin Williams < > [email protected]> wrote: > > Hi, > > > > I have enabled remote streaming but according to wireshark I only receive > 6x 4k packets. > > > > Everything about them is correct – the destination ip, port, size, etc. > > > > From the debug logs the stream is set up as: > > > > [DEBUG] [RFNOC] Creating diverted RX stream with arguments: > dest_addr=172.17.0.2,dest_mac_addr=02:42:ac:11:00:02,dest_port=1234,stream_mode=full_packet,__chdr_width=64,enable_remote_stream=1,enable_fc=0 > > [DEBUG] [X300::SFP0::TA_CTL] On transport adapter 0: Adding route from > EPID 6 to destination 172.17.0.2:1234 > <https://url.za.m.mimecastprotect.com/s/Al-NC98BNNiNO7DsofKiqDHZw?domain=172.17.0.2> > (MAC Address: 02:42:ac:11:00:02), stream mode FULL_PACKET (0) > > > > What could cause that streaming to stop (given there is no flow control)? > > > > Many thanks, Kevin > > > > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] > > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
