1. I can confirm that this file isn't being installed with UHD. I don't know why not. I think copying it over is fine if you're trying to compile against it.
2. It sounds like you're using an FPGA that is too old for this feature. Have you downloaded the latest FPGA images for UHD 4.10? You should be able to download the latest using the uhd_images_downloader utility. Wade On Thu, May 14, 2026 at 5:52 AM eunsung.son--- via USRP-users < [email protected]> wrote: > Hello, > > > I have two questions. > > 1. > > I would like to ask whether it is expected that the dram folder is not > included under the following RFNoC include path after installing the UHD > 4.10 release version: > > C:\Program Files\UHD\include\uhd\rfnoc\dram > > However, I can see the dram folder in the UHD 4.10 source code, so I > copied it from the source code into the installed UHD include folder. Is it > okay to use it this way? > 2. > > I am using an X410 with the UC_200 FPGA image, connected to a Windows > host PC. The UHD version on the X410 is shown below: > [INFO] [UHD] linux; GNU C++ version 11.5.0; Boost_107800; > UHD_4.10.0.0-0-g2af4ddb9 > > After applying the workaround described in question 1, I used the > upload function in dram_helper.hpp to upload a recorded file from the host > PC to DRAM in order to improve the transfer speed. > > After running the program, I encountered the following error message: > > [18:35:52] [ERROR] [XPORT::TX_DATA_XPORT] Requested 'stop on sequence > error' stream mode but FPGA does not report that this mode is enabled. > Please check whether the FPGA image supports this mode. > > [18:35:53] ERROR: RuntimeError: Requested 'stop on sequence error' > stream mode but FPGA does not report that this mode is enabled. Please > check whether the FPGA image supports this mode. > > Do I need to modify the FPGA image to resolve this issue? Or is there > another way to fix it? > > > > Thank you. > > > > Best regards, > > Eunsung > _______________________________________________ > USRP-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ USRP-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
