On Fri, 2005-02-18 at 11:48 -0700, jb wrote:
> So, I've had enough with lax security. Time was, if some distro's 
> firewall was blocking web or mysql traffic, I would just turn the darn
> thing off. Linux is secure enough, right?

BZZZZZ! Wrong answer.

> Well, lesson learnt.

Good.  Sorry if it was painful.

> So, now, I'm nursing back up a RedHat9 box, trying to make it secure 
> *and* accessible. I would love to put Fedora Core, or even Debian, but
> the RAID drivers are proprietary, and I haven't seen any for Fedora
> yet.

Lesson #2 pick Linux friendly raid.  Most raid cards are crap anyway.
Unless this is a *totally sweet* card, I'd strongly consider using
software raid anyway.  It's cake to setup and your server might not even
suffer by it.

> Anyway, when I installed RH9, I chose the "high" security setting, and
> told it to listen for web traffic (port 80). There was a field below 
> that for adding other ports to open, but I didn't fill it in. Now hat 
> everything's running, locally I can get to all the web and mysql
> stuff, but other computers can't even pull up a static HTML page. If I
> turn the firewall to medium, it doesn't help, but if I turn the
> firewall off, it works. I found out, much too late, that the little
> "Add other ports" field is not shown in the utility after install (but
> was in RH8???), so I can't add ports through the RH config tool.

Show the output from `iptables -L` when the box is on "high" and we'll
help point out the problem and offer a command that will fix it.

> So, do any of you remember any RH9 tricks, or should I just turn off
> the firewall, and install my own iptables?

RH firewall uses the same iptables that you would use.  Just edit what
they have or look at it and write your own based on them.  Again, post
what you have and what doesn't work and we will give you the commands to
run to make it all better. :)

Gabe

> --jerem

P.S. I recently did a presentation on iptables for UVLUG (Utah Valley
Linux Users Group - as if y'all didn't know what that stood for).  I
have a script posted that will help you set up a firewall with a dmz and
private subnet.  I hacked it together to be a starting point for others.
It might be a little more then you are looking for but it might also be
a good way to get your feet wet.  You will find it at http://gundy.org


--------------------
BYU Unix Users Group 
http://uug.byu.edu/ 

The opinions expressed in this message are the responsibility of their
author.  They are not endorsed by BYU, the BYU CS Department or BYU-UUG. 
___________________________________________________________________
List Info: http://uug.byu.edu/cgi-bin/mailman/listinfo/uug-list

Reply via email to