I'm trying to learn how to set up a PXE server. The client's output is this:
<code> Node: 00087402523F BOOTP. TFTP........... _ </code> syslog on the server for that time is: (slightly cleaned up): [4312603.231000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 dhcpd: BOOTREQUEST from 00:08:74:02:52:3f via eth0 dhcpd: BOOTREPLY on 192.168.1.241 to 00:08:74:02:52:3f via eth0 in.tftpd[20190]: RRQ from 192.168.1.241 filename pxelinux.0 [4312604.630000] eth0: link down [4312606.220000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 It seems to me that the ethernet link going down, then comming back up might be a problem, but I'm a total noob at this, so it's probably something else. Does anyone have an idea what could be wrong here? Thanks! -- Michael Moore ------------------------------- www.stuporglue.com -------------------- BYU Unix Users Group http://uug.byu.edu/ The opinions expressed in this message are the responsibility of their author. They are not endorsed by BYU, the BYU CS Department or BYU-UUG. ___________________________________________________________________ List Info: http://uug.byu.edu/cgi-bin/mailman/listinfo/uug-list
