Com port problems have plagued me before. The trick was to modify the default 
com port that the GPS uses to a lower one (from something like 45 to 6) and 
then the ArcMap toolbar could "see" it. You can adjust comports using the 
Windows device manager.

-Luke

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erik Kingfisher
Sent: Friday, May 09, 2008 12:12 PM
To: [email protected]
Subject: [UW-GIS-L] GPS Connection Problems

I've got some waypoints, etc. from a Garmin GPSmap 60CSx that I'd like to
import into ArcMap (9.2), but when I go to the GPS toolbar in ArcMap and try
to make a connection I get the error message: "Communication Port not
supported by hardware - please use a different one"

I've connected the Garmin to the computer using a USB cable, and have no
other way to connect it.  I can access the .gpx files on the GPS unit, but
have no way, it seems, to integrate the data into ArcMap.
The baud rate and datum settings are set correctly on the ArcMap GPS
connection window and the GPS unit.

Can anyone out there help me get this data into ArcMap so I can project the
waypoints, etc. on a map?

Erik


Erik Kingfisher
Stewardship Director
Jefferson Land Trust


_______________________________________________
Uw-gis-l mailing list
[email protected]
http://mailman1.u.washington.edu/mailman/listinfo/uw-gis-l
_______________________________________________
Uw-gis-l mailing list
[email protected]
http://mailman1.u.washington.edu/mailman/listinfo/uw-gis-l

Reply via email to