Charles, Remember ... I slid the gray connector out of my connector, (releases with a toothpick), and I still got the open, close and short adjustment movements ... so connecting the gray to the yellow, (RPM monitor), should not be an issue for "key on" initialization. (bad rheostat .. bad rheostat ... $5 on bad rheostat .. ;>) campbell ----- Original Message ----- From: <[EMAIL PROTECTED]> Subject: Fw: V-boost & wiring harness on a non V-boost European 99 Max Again. > snip < > So if I connect the brown cable on the three spade connector > from the control box to a 12 V DC source (a battery I have at home) > and the black to the negative of that same battery I should be > able to produce the same effect as if the whole thing was wired > on the bike...... > Well it does the first "BZZZ" but not the second and the butterflies > stay put at 3/4 of totally open. Am I missing something? Maybe > the remaining grey line connecting to the yellow from the rev > counter signal should also be wired, but I don't want to cut the > bike's harness open till I know that the system I purchased > second hand is working properly. > snip < ............................................. To unsubscribe go to http://www.sayegh.org/unsubscribe.htm .............................................
