Thanks Dennis, maybe now you should try pulling shims out of needles to lean
back the part throttle fuel a bit? Let us know what you end up doing.
Sam Blumenstein #795
Dennis Clarke wrote:
> Hello Sam,
>
> to install the jets remove the carbs, and separate 1,2 from 3,4. remove the
> fuel bowls, and the jets are housed in a holder held down by 2 screws and a
> brass cap. i had to use vise grips to remove the screws holding the bowls.
>
> I'm stilling working out the fine tuning as the plugs are a little dark for
> my likening.
>
> later
> Dennis
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
