Steve,
According to the information I received from Charles .. you need the 1
spark/rev model .. (they are monitoring one ignition coil). The lead
you want to "tap" with their "blue" wire is "orange" ... The orange
wire starts life as part of a braided pair, (orange/black), from the
pickup coil .. It changes to a plastic insulated orange/black pair
behind the rear ignition coils ... (the only orange/black single pair
connector back there). It continues on to the ignitor plug ........
campbell
----- Original Message -----
From: "Steve Gill" <[EMAIL PROTECTED]>
Subject: Re: VTAC Rev Limiter
> Which model limiter do I need to order from VTAC? I
> guess it is a type 2 but what config do I need? My
> max is 99. Also what colour is the wire that needs to
> be tapped in order to control the ignitor box and
> where can I find it? Help me out here.
>
> The VTAC site lists the following:
>
> The following is a summary of the various software
> that can be supplied for the VTAC unit with technical
> parameter's
>
> PART NUMBER: PARAMETERS:
> 980512P1/108 2000 - 16000RPM 1 SPARK/rev
> 980512P1/201A 1000 - 8000RPM 2 SPARK/rev
> 980512P1/302A 2000 - 16000RPM 1 SPARK/2 rev
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................