VMAX PARTS FOR SELL!!

[Doug Nelson]

Hi every one. Due to personnal reasons I must sell all VMAX parts. I have alot of parts that I will sell at a very, very low prices. These savings I will pass to my fellow VMAX friends. I hope that in the future I can buy a new vmax and start riding again with my fellow VMAX friends. I hope this isnt to long, Take care. E-mail me if interested     [EMAIL PROTECTED] INFO: Total investment, includes core cost of parts, plus total machine cost, polishing cost, , coating cost,                     chrome cost ect.             Price, is what I paid for the new or used part .   1) Complete, 80 ci polished, magna charger teflon seal blower, my blower set up, minus carborator. INCLUDED, Polished blower,     custom high flow ported manifold 1200cfm, dual relief valves, 2" Blower pulley, 2"crank pulley, crank adapters bolt, 2" Belt,             blower shaft oil seal, flywheel cover boost gage. If it doesnt work, you dont pay. I can also install, if you like                     Total investment: $4800.00,   will sell for $2500.00 1a) Beautiful set of PCW  polished Very lite, 3 spoke rims, rear is sprocket chain drive type with sprocket. rims come with very         nice, disc (Have not been used) Total investment, over $1000.00, will sell for $500.00 2) New rear tire, Pirelli Dragon Corsa MTR02, race compound, 190-50ZR-17. Cost over $200.00, will sell for $125.00 3) New front tire Dunlop, D207F sportmax compound, 120-60ZR-17. Cost over 125.00. Will sell for $75.00 4) New, sharp looking, GSXR looking front fender. Painted Cost Over 100.00, Will sell for $50.00 5) Beautiful, New, chrome plated front fork brace, ball milled. Total investment over $100.00, Will sell for $50.00 6) Mad max 6" extended, reinforced chrome moly, chain drive rear swing arm, with axle inserts and machined rear axle and nut.     Total investment over $450.00, Will sell for $200.00 7) New, nice looking, large capacity custom aluminum radiator (fan included) Cost over $400.00, Will sell for $225.00 8) New set of beuatiful, aluminum, rectangle blue tinted rear view mirrors. Cost Over $150.00, Will sell for $70.00 9) New, set of front fork,clamp on, fully adjustable handle bars. (New, Magura see through clutch brake, master cyl included)                 Total investment Over $350.00, Will sell for $150.00 10) New, 5" VMAX Tac, with exteral mounted shift lite. Made for motor cylcles, 9K shift moduals ( chrome plated ,mount bracket)                 Total investment Over $350.00, Will sell for $200.00 11)  New, rear, chrome plated, adjustable struts, Total investment over $200.00, Will sell for $75.00 12) Slightly used Pingle wheelie bars, Cost over $200.00, Will sell for $100.00 13) New, complete set of transmision gears, I will throw the shafts in for free  (All cryo-frozen and tefloned coated)                 Total investment  over $700.00, Will sell for $225.00 14) New, new model voltage regulator, (grounded type) Cost Over $145.00, Will sell for $90.00 15) New, new model, PCW machined, ultra lite , adjustable digital, aluminum trigger ring, flywheel. (piece of art) Cryo-frozen,     starter gear included for free        Total investment over $700.00, Will sell for $325.00 16) New, PCW carrillo LONG RODS,  20mm rod ends, can be rebushed to your prefered size at little cost, (cryo frozen, oil shed     coated)            Total investment over $1000.00,    Will sell for $550.00 17) New, J&E 1608cc 9:1 pistons. Cryo-frozen, teflon, ceramic coated (set of 5) o-ring cyl sleeves included) tool steel wrist pins,             Total investment over 900.00,     Will sell for 450.00 18) Used, blue printed, higher pressure oil pump using shim under relief spring Will sell for $100.00 19) New, new model fly wheel stator, Will sell for $100.00 20) Used, newer model, 1993 ignition control box, (very little operation time.  Cost over $300.00, Will sell for $200.00 21) Used, old model, 1985 ignition control box, Will sell for $125.00 22) New, 2 sets of nology wires (1 set red, 1 set black. Cost over $150.00 per set, Will sell for $80.00 per set 23) Slightly used, PCW, COMPLETE, individual spring type, adjustable, lock up clutch assy, INCLUDED, Hub assy, Boss assy,         new barnet clutch friction/steel plates, Aluminum, centrifical lock up with adapter plate, nut and washer. (cryo-frozen)                 Total Invesment, over $1000.00, Will sell for $450.00 24) Slightly used, new model, 4 brush type starter, Will sell for $200.00 25) Used, old model, 2 brush starter, Will sell for $100.00 26) New set of .416 lift, 275 degrees duration Cams, (cryo-frozen, teflon coated), Investment over $850.00, Will sell for $375.00 27) Used, 2 spark plug per cyl heads, PCW stage 3 ported, (135CFM),  Shim under bucket, 32mm Stainless steel intake,             26mm Stainless exhaust, valves, ALSO INCLUDED  1 set of 2.2 OHM Dyna, dual output coils. NOTE: MIGHT  SELL VALVES      SEPERATE, Invested over $2500.00, Will sell for $1000.00. Valves alone, with titanium shim under bucket set up, cost $800.00,             will sell for $400.00 28) Used, vented valve cover (12 an vent fittings) Will sell for $30.00 29) Used, clutch cover, Will sell for $30.00 30)  New, set of race cam chains  Will sell for $25.00 31) Used cam chain tensioners, Will sell for $25.00 32) Used, old model pick up coils, Will sell for $70.00 33) Used, old model flywheel stator Will sell for $75.00 34) 1985 front forks, triples included, Will sell for $100.00 35) ALOT of new, dress up stuff, center engine air breather ball milled covers, chrome ball milled handle bar grips, chrome brake         caliper end caps, much more please e-mail for rest 36) Ceramic coated, polished, race dump pipe exhaust, 4 seperate pipes. 21" length, Will sell for $75.00 37) MRE deluxe auto electric air shifter, upgraded large shift cylinder. Cost over $250.00, Will sell for $125.00 38) Aluminum PCW, motor mounts, chrome plated ends, 1 is cut some for chain drive, Cost $120.00, Will sell for $50.00