I'm trying to get one of the boards, but it make take a few days. In the meantime, can you try to run 'd8' shell directly. In a normal build this would be in out/mips.release/d8. Please let me know if that comes up OK, or if not, what messages are printed. If it is broken, you could also try building the debug version (rather than release), as that may provide more information.
Finally, can you point me to the specific build instructions you are using for this board? I don't use 'configure' for building v8, so I presume this is related to your OS, package-manager, or something. paul > On Feb 11, 2015, at 1:35 AM, Arturo Rinaldi <arty.n...@gmail.com> wrote: > > > > Since I'm cross-compiling rather than building natively on a target I think > that : > > snapshot=off > > is the right choice also according to what I have read over the internet. I > have re-built both the v8 package and node.js. V8 is built now with the > default options for mips architecture as we discussed earlier while node is > configured with just : > > ./configure --prefix=/usr --without-snapshot --shared-v8 > --shared-v8-includes="$(MYDIR)/include/" > --shared-v8-libpath="$(MYDIR)/usr/lib"; > > A little progress has been made, by which I mean that time I don't get the > floating point expcetion : > > > <https://lh3.googleusercontent.com/-1ti7OfvfV2E/VNsghzVA0bI/AAAAAAAAAvQ/LylFO8DLKrQ/s1600/no_floating.png> > > however, the node interpreter is stuck every time I launch its shell, or npm > or a simple test program such as the JS Hello World. > > I am a owner of a Dog Hunter Linino ONE : > > http://shop.linino.org/products/linino-one > > and of a Arduino YUN : > > http://shop.linino.org/products/arduino-yun-dogstick > > running both OpenWRT 12.09 (with linux kernel 3.3.8). The first one is > basically the same of the Yun except for a reduced form factor (the hardware > is the same : Atheros AR9331 as linux cpu and Atmel ATmega32u4 as MCU) > > Thank you in advance for everything you can find about this issue > > Regards, Arturo > > Il giorno mercoledì 11 febbraio 2015 06:24:37 UTC+1, paul lind ha scritto: > Hi Arturo - If you are building natively on your target, then you should be > able to build with snapshot=on (the default). That makes startup a lot faster. > > If your board is in a commercially available product, please let me know what > it is. We might give one a try here. > > paul > > >> On Feb 10, 2015, at 5:31 PM, Arturo Rinaldi <arty...@gmail.com >> <javascript:>> wrote: >> >> Hello Paul, you're guessing right. I always build the v0.10.x series of the >> node tarballs with a shared build of V8 from your v8m-rb repo. >> >> I am well aware that v8 3.20 and on have total support for MIPS architecture >> and better performances on it. For this very reason I was trying to build an >> updated version of both V8 and node itself for my board. >> >> Please consider also the fact that OpenWRT (the OS running on my board) has >> a embedded SDK of its own and and a build with QEMU would be really useless >> to me. The MAKE arguments are the following for V8 : >> >> $(MAKE) mips.release werror=no library=shared snapshot=off i18nsupport=off >> >> and for node.js : >> >> $(MAKE) snapshot=off werror=no (I think that i18nsupport=off is not >> necessary here because of the previous build of V8 without i18n support) >> >> I'll try tomorrow to force the build with the default FPU options enabled >> and report here in the list. I hope to get my Atheros9300 CPU based board >> working with this build... >> >> Regards, Arturo >> >> Il giorno mercoledì 11 febbraio 2015 00:06:10 UTC+1, paul lind ha scritto: >> Sorry, but that is not going to work. From your earlier screenshot I am >> guessing that you previously used node 10, with v8 3.14 from our old github >> repo. >> >> The good news is that the MIPS big-endian support is all upstream in v8 repo >> since 3.26, which of course includes the 3.28 version in node 12. >> >> The not-so-good news is that after 3.17, v8 does not support soft-float >> builds, for either ARM or MIPS. >> >> However, if you build v8 with FP instructions, it will work fine using the >> kernel FP emulator that is in any more-or-less recent kernel. I am running >> big-endian boards here with 3.4.27 kernel. It's slow on FP-intensive work, >> like some benchmarks, but overall it works very well for most apps. >> >> You can build for FP by using the GYP defaults, or setting them explicitly >> like this: >> >> export GYPFLAGS="-Dv8_use_mips_abi_hardfloat=true >> -Dv8_can_use_fpu_instructions=true" >> >> You should try a build without snapshots, and big-endian does not currently >> support i18n: >> make mips.release -j12 snapshot=off i18nsupport=off >> >> If you want to use snapshots, you can either build on your native mips >> board, or use qemu as a helper to cross-compile the snapshot image: >> https://github.com/paul99/v8m-rb/wiki/Building-v8-for-BE-with-QEMU >> <https://github.com/paul99/v8m-rb/wiki/Building-v8-for-BE-with-QEMU> >> >> Hope this helps... >> >>> On Feb 10, 2015, at 2:44 PM, Arturo Rinaldi <arty...@gmail.com <>> wrote: >>> >>> Luckily, it is just a typo in my mail. I double checked and the settings in >>> the makefiles are right. I have also performed a deep "sweep" into the gyp >>> files and found the environment variables to build the V8 libraries with. >>> >>> I am now able (maybe) to track down my issues to the node source. I have >>> always built the sources until now with these CLI options : >>> >>> --dest-cpu=mips --dest-os=linux --with-mips-float-abi=soft; >>> >>> However, I noticed time ago (since the unstable release of the node v0.11.x >>> series) that this option has been removed. Just before discovering this >>> mips-switch in the configure help, I used to build node with the : >>> >>> --with-arm-float-abi=soft >>> >>> option, which did the trick very well without any sort of issues. Do you >>> think that reinstating this last option could solve my issue ? (i.e. the >>> floating point will work in the right way on MIPS arch as well). >>> >>> It could be a great achievement for me running the latest version of node >>> on my embedded platform since I need for work purposes.... >>> >>> Il giorno martedì 10 febbraio 2015 22:55:49 UTC+1, Jakob Kummerow ha >>> scritto: >>> What Ben said. Most flags are defined in build/toolchain.gypi and >>> build/features.gypi. >>> >>> In the case at hand: >>> >>> On Tue, Feb 10, 2015 at 5:51 PM, Arturo Rinaldi <arty...@gmail.com <>> >>> wrote: >>> > GYPFLAGS="-Dv8_use_mips_abi_hardfloat=false >>> > -Dv8_can_use_fpiu_instructions=false" >>> >>> If "fpiu" is not just a typo in your mail, then that's your problem. It >>> should be "fpu". >>> >>> > >>> > I have recently built the latest tarball of node, v0.12.0, for my >>> > platform but get this "Floatgin Point error" exception >>> > >>> > any hint on this issue ? >>> > >>> > Regards, Arturo >>> >>> You can find out what GYP flags are supported by checking the >>> 'variables' sections in the various *.gyp and *.gypi files that are >>> scattered across the source tree. >>> >>> -- >>> -- >>> v8-users mailing list >>> v8-u...@googlegroups.com <> >>> http://groups.google.com/group/v8-users >>> <http://groups.google.com/group/v8-users> >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "v8-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to v8-users+u...@googlegroups.com <>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >>> >>> >>> -- >>> -- >>> v8-users mailing list >>> v8-u...@googlegroups.com <> >>> http://groups.google.com/group/v8-users >>> <http://groups.google.com/group/v8-users> >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "v8-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to v8-users+u...@googlegroups.com <>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >> >> >> -- >> -- >> v8-users mailing list >> v8-u...@googlegroups.com <javascript:> >> http://groups.google.com/group/v8-users >> <http://groups.google.com/group/v8-users> >> --- >> You received this message because you are subscribed to the Google Groups >> "v8-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to v8-users+u...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > -- > v8-users mailing list > v8-users@googlegroups.com > http://groups.google.com/group/v8-users > <http://groups.google.com/group/v8-users> > --- > You received this message because you are subscribed to the Google Groups > "v8-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to v8-users+unsubscr...@googlegroups.com > <mailto:v8-users+unsubscr...@googlegroups.com>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- -- v8-users mailing list v8-users@googlegroups.com http://groups.google.com/group/v8-users --- You received this message because you are subscribed to the Google Groups "v8-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to v8-users+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
