Oliver,
If you have any of those LH screw-type EZ-Outs, throw 'em in the
garbage can. Get the kind that are square; you hammer 'em into the hole,
then extract the broken bolt. If an EZ-Out will work at all, these will,
I've never had any luck at all with the more-common type.
<<Jim>>
Carol and Oliver Filippi wrote:
>
> -
> E-Z out screw extractors work ok on larger bolts, but are difficult on small
> diameter ones. Also, you can't drill out sheet metal screws, since they are
> hardened steel. Another trick is to use the special left hand spiral drills
> prior to using the E Z Out.
>
> Oliver Filippi
>
-
--
<<http://www.oldengine.org/members/jdunmyer>>
<<[EMAIL PROTECTED]>>
<<lower SE Michigan, USA>>
<<mailto:[EMAIL PROTECTED]>>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
