Hi guys, In earlier versions I had a similar problem. I made the decks slightly bigger and made sure taht there was space between different decks to hold a full deck without encroaching on another deck.
This worked succesfully with the HL2 series and the pilot decks get pretty full by the time you have added in all the modules. Regards Jerry ----- Original Message ---- From: Brent Easton <[EMAIL PROTECTED]> To: [email protected] Sent: Tuesday, 22 January, 2008 5:13:01 AM Subject: Re: [vassalengine] Bug with 'Does not Stack' Is the module you are using available for download? I have been unable to reproduce this in a small test module. Regards, Brent. >*********** REPLY SEPARATOR *********** > >On 21/01/2008 at 9:31 PM David Neumann wrote: >Hi all, > >I've been having a problem with cards and discard piles. Basically, >when I send cards (either through dragging or via a 'return to deck' >command) to a discard deck they 'stack' instead of going into the >deck. The first card goes into the discard deck OK, but then others >just go into a stack on top of the discard deck. > >When I turn 'does not stack' off on the cards, then they discard >normally without issue. > >Is this a known issue, or can it be looked at for a future release? > >Thanks, > >Dave ____________ _________ _________ _________ _________ _________ _ Brent Easton Analyst/Programmer University of Western Sydney Email: [EMAIL PROTECTED] edu.au __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com [Non-text portions of this message have been removed]
