On March 7, 2007, Pablo Sanchez wrote:
> >
> > my ifconfig looks like:
> > eth0 Link encap:Ethernet HWaddr 00:12:3F:1E:13:28
> > inet addr:192.168.0.172 Bcast:192.168.0.255
> >
> > eth1 Link encap:Ethernet HWaddr 00:13:CE:24:3F:DE
> > inet addr:192.168.0.171 Bcast:192.168.0.255
>
> Are you load-balancing across eth0 and eth1? Why are they in the same
> class C?
huh? what is load-balancing? and what same class? :o
>
> > tap0 Link encap:Ethernet HWaddr 5E:FB:B8:31:60:CC
> > inet addr:192.168.0.111 Bcast:192.168.0.255
>
> You didn't use the information I sent eh? The commands I sent don't set
> the IP address of 'tap0'
I set the IP now to 0.0.0.0
tap0 Link encap:Ethernet HWaddr 42:FD:E9:89:33:B1
inet6 addr: fe80::40fd:e9ff:fe89:33b1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:19 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
but i get the same result :o
>
> Why not reboot your machine and start fresh?
Done that already ten times ;)
>
> > Failed to initialize Host Interface Networking.
> > At '/home/vbox/lnx-rel/src/VBox/Main/ConsoleImpl.cpp' (5018)
> > in static int
> > Console::configConstructor(VM*, void*).
> > VBox status code: -3100 VERR_HOSTIF_INIT_FAILED
>
> As a test, I set my Host Interface to point to a bogus value and I received
> the above error.
What's a bogus value?
Thanks for helping!
--
chEErs roN
_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users
