I have been using 1.5.2 for some time now on my Evesham laptop, running openSuse 10.3 as host and Windows XP as guest.
I initially had some problems a few weeks ago, trying to update to 1.6.2. That appeared to work fine. but I had the problem that it would not re-start a machine after I had chosen "save the machine state" from the shutdown menu. I tried today to upgrade to 1.6.4, and I couldn't get any of my .vdi files to run at all. They appeared to start loading, then I got a screen saying the I had changed hardware, and to try re-booting in safe mode, or last known good configuration etc. I also tried 1.6.2. again today and had the same problem. I seem to remember that I should have seen a screen asking me to save, or backup and save, some new settings. I saw that before when I tried 1.6.2, but didn't see it today. I also have another hard-drive for this laptop on which I have installed openSuse 11.0. I had identical problems when I tried to run 1.6.4. on that yesterday. I eventually managed to get it to boot a .vdi using "last known good configuration", but here as well it would not let me re-start a machine after using "save the machine state". I know I will have to tackle one problem at a time, but I thought a general overview of the problems I have been having might be useful. I am not an expert, (by a long way !), but I will do my best to send any log files or error messages that might help someone solve this for me. Thanks in advance Paul Williamson _______________________________________________ vbox-users mailing list [email protected] http://vbox.innotek.de/mailman/listinfo/vbox-users
