Hi all,
I am still struggling to access a Hayes modem from an XP guest. I have
Solaris 10 running on a X2200 with VirtualBox 2.2.2 installed. I have
setup a WinXP guest. A Sun Ray 2 is connected to the X2200 box and its
serial port is accessible via
/tmp/SUNWut/units/IEEE802.00144fb78813/dev/term/a. I can also do
tip /tmp/SUNWut/units/IEEE802.00144fb78813/dev/term/a
and send an ATZ to the modem. It responds with OK. In the virtual box
settings for the WinXP guest I have enabled serial port 1 (COM1) and
specified the above path. I went into the device manager and made sure
that the serial port shows up which it does. WinXP automatically
recognized the ELSA 28.8000 modem which makes me thinking that windows
must have talked with the modem. All fine so far.
However, if I start HyperTerminal or Kermit and try the "ATZ" thing on
COM1 I get nothing. May be I am too stupid to correctly use
HyperTerminal, that's why I also tried kermit. But since both
approaches did not work for me I suppose that something else is still
wrong!?
Any idea?
Thanks a lot!
Regards,
Andreas
_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users
