Hi all,

I'm having some problems trying to upgrade my vpopmail 5.2 to 5.4.0. The
compilation goes well (no errors at this stage), but after the
instalation, just a few minutes later, the load of the server begins to
get high, very high... :-(. When issuing a top, I see a lot of process
of vdelivermail eating all cpu resources:


------------------------------------------------------------------------
------
Last pid: 94268;  load averages: 34.92, 14.57,  8.28 up 6+01:40:03
16:22:59
175 processes: 36 running, 119 sleeping, 20 zombie
CPU states: 40.5% user,  0.0% nice, 58.0% system,  1.6% interrupt,  0.0%
idle
Mem: 76M Active, 300M Inact, 89M Wired, 23M Cache, 61M Buf, 12M Free
Swap: 1500M Total, 348K Used, 1500M Free

  PID USERNAME PRI NICE  SIZE    RES STATE    TIME   WCPU    CPU COMMAND
92591 vpopmail  62   0  2516K  1456K RUN      0:05  3.50%  3.47%
vdelivermail
92083 vpopmail  61   0  2516K  1460K RUN      0:08  3.33%  3.32%
vdelivermail
91842 vpopmail  61   0  2516K  1244K RUN      0:10  3.28%  3.27%
vdelivermail
92320 vpopmail  62   0  2516K  1452K RUN      0:06  3.29%  3.27%
vdelivermail
92588 vpopmail  62   0  2516K  1456K RUN      0:05  3.30%  3.27%
vdelivermail
92773 vpopmail  63   0  2516K  1456K RUN      0:04  3.28%  3.22%
vdelivermail
93178 vpopmail  62   0  2516K  1456K RUN      0:03  3.26%  3.08%
vdelivermail
93464 vpopmail  62   0  2516K  1448K RUN      0:02  2.90%  2.49%
vdelivermail
93366 vpopmail  61   0  2516K  1464K RUN      0:02  2.58%  2.29%
vdelivermail
------------------------------------------------------------------------
------

My guess is that the bootleneck is in the filesystem, but I cant figure
out how to avoid this.. Here is my configure command:

./configure --enable-tcpserver-file=/RAID0/vpopmail/etc/tcp.smtp
--enable-auth-module=ldap \
--enable-roaming-users=y --enable-logging=p --disable-clear-passwd
--enable-domainquotas=y \
--enable-md5-passwords=n --enable-file-locking=n --disable-users-big-dir

/RAID0 points to a dedicated disk, where I put the queue and the
archives related to roaming users (open smtp, tcp.cdb, etc), trying to
achieve better IO performance....

My configuration is:

FreeBSD 4.9-p4
Vpopmail 5.4.0 (was 5.2)
OpenLDAP
Qmail 1.03


Thanks in advance!

_______________________________________
ALMEIDA, Fernando Costa de
Computeasy Informática
www.computeasy.com.br
BSD USER BSD050945
ICQ 72293951

Reply via email to