On Friday 17 Feb 2006 16:18, Yavuz Maslak wrote: > Well > I have 10 domains. > I want to check users for 3 domains. > How can I set chkuser_settings.h that ? > Thanks
have a careful read on http://www.interazioni.it/opensource/chkuser/documentation/ CHKUSER_STARTING_VARIABLE 2.0.5 commented "CHKUSER_START" Sets the variable that must be read, at qmail-smtpd start, in order to understand how to use chkuser for any domain. The variable must be filled with the following values: * NONE = chkuser will not work * ALWAYS = chkuser will work always * DOMAIN = chkuser will work depending on single domain settings > > ----- Original Message ----- > From: "Bob Hutchinson" <[EMAIL PROTECTED]> > To: <vchkpw@inter7.com> > Sent: Friday, February 17, 2006 3:20 PM > Subject: Re: [vchkpw] I could not patch netqmail-1.05_chkuser-2.0.8.patch > > > On Friday 17 Feb 2006 11:18, Yavuz Maslak wrote: > > > I use netqmail1.05 with vpopmail5.4.x > > > > > > After I patched netqmail-1.05 with qmail-toaster-0.8.1.patch > > successfully, > > > > I wanted to patch it with netqmail-1.05_chkuser-2.0.8.patch. But I > > > could not patch beause I got some errors. > > > > chkuser-2.0.8 is already in the qmail-toaster-0.8.1.patch > > > > look in your source tree, you should find chkuser_settings.h, in which > > the version number is stated. > > It also contains a number of things which you might want to > > enable/disable, > > > depending on your setup > > > > -- > > ----------------- > > Bob Hutchinson > > Midwales dot com > > ----------------- -- ----------------- Bob Hutchinson Midwales dot com -----------------
