can you be more specific I am not very good with linux and detailed instructions would be helpfull
Roger Herling Sr. Desktop Administrator Marist College PH: 845-575-3347 From: Vallard Benincosa <vall...@benincosa.com> To: vcl-dev@incubator.apache.org Date: 05/17/2010 01:39 PM Subject: Re: Change image timeout xCAT puts that in the site table which is on default xCAT 1.3 installations at /opt/xcat/etc/site On Mon, May 17, 2010 at 10:35 AM, Roger Herling <roger.herl...@marist.edu>wrote: > Where do I set that? > > > Roger Herling > Sr. Desktop Administrator > Marist College > PH: 845-575-3347 > > > > From: > Andy Kurth <andy_ku...@ncsu.edu> > To: > vcl-dev@incubator.apache.org > Date: > 05/14/2010 10:03 AM > Subject: > Re: Change image timeout > > > > I'm assuming you're using xCAT 1.3. Would it be possible to configure > xCAT to > store the images in /opt/image/x86? The VCL xCAT code really needs the > image > path to contain a 3rd component because it determines where the images > reside as > follows: > > <managementnode.installpath>/<OS.sourcepath>/<image.architecture> > > If you can configure xCAT to use /opt/image/x86, then > managementnode.installpath > should be set to /opt and I believe the path should be constructed > correctly. > > Hope this helps, > Andy > > Roger Herling wrote: > > xCAT root path is /opt/xcat according to the vcld log > > > > but the images are actuially store in /opt/x86 > > > > Roger Herling > > Sr. Desktop Administrator > > Marist College > > PH: 845-575-3347 > > > > > > > > From: > > Andy Kurth <andy_ku...@ncsu.edu> > > To: > > vcl-dev@incubator.apache.org > > Date: > > 05/11/2010 10:49 AM > > Subject: > > Re: Change image timeout > > > > > > > > I believe the problem is related to the Install Path setting for your > > management > > node: > > Management Nodes > Edit Management Node Information > Edit > > > > Based on the paths being used, I'm guessing yours is set to > 'storage/x86'. > > > > Where does the partimage .gz file reside? If it actually resides in > > '/storage/image/x86' then change the Install Path setting to 'storage'. > > > > The .tmpl file residing in this directory may indicate another problem > > with the > > xCAT root path. Where is xCAT installed and which version of xCAT are > you > > > > using? Search your log file for 'xCAT root path found:'. What path > does > > this > > line contain? > > > > Regards, > > Andy > > > > > > Roger Herling wrote: > >> [r...@vcl ~]# du -c > > /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > >> 4 /storage/x86/image/x86/winvista-Windows7FacStaff49-v0.tmpl > >> 4 total > >> > >> [r...@vcl ~]# ls -l > > /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > >> -rw-r--r-- 1 root root 352 May 10 12:09 > >> /storage/x86/image/x86/winvista-Windows7FacStaff49-v0.tmpl > >> > >> > >> Roger Herling > >> Sr. Desktop Administrator > >> Marist College > >> PH: 845-575-3347 > >> > >> > >> > >> From: > >> Andy Kurth <andy_ku...@ncsu.edu> > >> To: > >> vcl-dev@incubator.apache.org > >> Date: > >> 05/11/2010 09:06 AM > >> Subject: > >> Re: Change image timeout > >> > >> > >> > >> The command that is being executed to check the size should be: > >> du -c /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > >> > >> Try running this. What output does it generate? The last line should > >> look like: > >> xxxx total > >> > >> The code appears to be finding the 'total' line but is either not > > parsing > >> it > >> correctly, not calculating the size correctly, or the du command isn't > >> correct. > >> > >> Also, it would be helpful if you include the output from: > >> ls -l /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > >> > >> -Andy > >> > >> > >> Waldron, Michael H wrote: > >>> So you never answered whether you watched the capture occurring from > > the > >> node console. Can you watch the console and see the capture running > > while > >> monitoring the log that shows the capture file is size 0? > >>> What about any other error messages for the rest of the log capture > for > > > >> this imaging request? > >>> Mike Waldron > >>> Systems Specialist > >>> ITS Research Computing > >>> University of North Carolina at Chapel Hill > >>> CB #3420, ITS Manning, Rm 2509 > >>> 919-962-9778 > >>> > >>> > >>> -----Original Message----- > >>> From: Roger Herling [mailto:roger.herl...@marist.edu] > >>> Sent: Monday, May 10, 2010 4:18 PM > >>> To: vcl-dev@incubator.apache.org > >>> Subject: RE: Change image timeout > >>> > >>> yup > >>> Roger Herling > >>> Sr. Desktop Administrator > >>> Marist College > >>> PH: 845-575-3347 > >>> > >>> > >>> > >>> From: > >>> "Waldron, Michael H" <mwald...@email.unc.edu> > >>> To: > >>> "'vcl-dev@incubator.apache.org'" <vcl-dev@incubator.apache.org> > >>> Date: > >>> 05/10/2010 04:17 PM > >>> Subject: > >>> RE: Change image timeout > >>> > >>> > >>> > >>> So you can do an "ls -l > >>> /storage/x86/image/x86/winvista-Windows7FacStaff49-v0" and it shows > > some > >>> size? > >>> > >>> > >>> > >>> Mike Waldron > >>> Systems Specialist > >>> ITS Research Computing > >>> University of North Carolina at Chapel Hill > >>> CB #3420, ITS Manning, Rm 2509 > >>> 919-962-9778 > >>> > >>> > >>> -----Original Message----- > >>> From: Roger Herling [mailto:roger.herl...@marist.edu] > >>> Sent: Monday, May 10, 2010 4:03 PM > >>> To: vcl-dev@incubator.apache.org > >>> Subject: RE: Change image timeout > >>> > >>> The image is definately being captured and I can force the image to be > > >>> used after it fails by manually undeleting it from the mysql database > >>> Roger Herling > >>> Sr. Desktop Administrator > >>> Marist College > >>> PH: 845-575-3347 > >>> > >>> > >>> > >>> From: > >>> "Waldron, Michael H" <mwald...@email.unc.edu> > >>> To: > >>> "'vcl-dev@incubator.apache.org'" <vcl-dev@incubator.apache.org> > >>> Date: > >>> 05/10/2010 04:01 PM > >>> Subject: > >>> RE: Change image timeout > >>> > >>> > >>> > >>> From these lines in the log, it's indicating that the capture hasn't > >>> started: > >>> > >>> 12:31:01|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning > > image > >>> size: 0 MB (4 bytes) > >>> 2010-05-10 > >> 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image > >>> size is the same: 0=0, copy may be complete > >>> 2010-05-10 > >> 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1238)|image > >>> copy not complete, sleeping for 30 seconds > >>> > >>> Notice the image size is 0 MB, meaning the partimage save isn't > >> occurring. > >>> After 20 minutes of nothing being saved, it gives up. Can you watch > the > > > >>> capture from the server console to verify that the PXE boot is running > > >> and > >>> that it's booting into the image capture mode? Do the log entries at > > the > >>> beginning of the imaging process show any errors? > >>> > >>> > >>> Mike Waldron > >>> Systems Specialist > >>> ITS Research Computing > >>> University of North Carolina at Chapel Hill > >>> CB #3420, ITS Manning, Rm 2509 > >>> 919-962-9778 > >>> > >>> > >>> -----Original Message----- > >>> From: Roger Herling [mailto:roger.herl...@marist.edu] > >>> Sent: Monday, May 10, 2010 3:25 PM > >>> To: vcl-dev@incubator.apache.org > >>> Subject: RE: Change image timeout > >>> > >>> 010-05-10 > >>> > > > > 12:31:01|9225|144:178|image|xCAT.pm:_get_image_repository_path(3271)|returning > > > > >>> repository path for vcl.is.marist.edu: /storage/x86/image/x86 > >>> 2010-05-10 > >>> 12:31:01|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning > > image > >>> size: 0 MB (4 bytes) > >>> 2010-05-10 > >> 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image > >>> size is the same: 0=0, copy may be complete > >>> 2010-05-10 > >> 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1238)|image > >>> copy not complete, sleeping for 30 seconds > >>> 2010-05-10 > >>> 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1239)|attempt > > 38/40: > >>> image copy not complete, sleeping for 30 seconds > >>> 2010-05-10 12:31:06|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:06 > >>> 2010-05-10 12:31:11|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:11 > >>> 2010-05-10 12:31:16|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:16 > >>> 2010-05-10 12:31:21|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:21 > >>> 2010-05-10 12:31:26|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:26 > >>> 2010-05-10 12:31:31|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:31 > >>> 2010-05-10 > >> 12:31:32|9225|144:178|image|xCAT.pm:_nodeset_option(1697)|node4 > >>> in image image-x86-winvista-Windows7FacStaff49-v0-all state > >>> 2010-05-10 > >>> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1246)|nodeset > > status > >>> for node4: image image-x86-winvista-Windows7FacStaff49-v0-all > >>> 2010-05-10 > >>> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1254)|checking > size > > > >> of > >>> winvista-Windows7FacStaff49-v0 > >>> 2010-05-10 > >>> 12:31:32|9225|144:178|image|xCAT.pm:get_image_size(3109)|getting size > > of > >>> image: winvista-Windows7FacStaff49-v0 > >>> 2010-05-10 > >>> > > > > 12:31:32|9225|144:178|image|xCAT.pm:_get_image_repository_path(3175)|management > > > > >>> node identifier argument was not specified > >>> 2010-05-10 > >>> > > > > 12:31:32|9225|144:178|image|xCAT.pm:_get_image_repository_path(3197)|attempting > > > > >>> to determine repository path for image on vcl.is.marist.edu: > >>> |9225|144:178|image| image id: 49 > >>> |9225|144:178|image| OS name: winvista > >>> |9225|144:178|image| OS type: windows > >>> |9225|144:178|image| OS install type: partimage > >>> |9225|144:178|image| OS source path: image > >>> |9225|144:178|image| architecture: x86 > >>> 2010-05-10 > >>> > > > > 12:31:32|9225|144:178|image|xCAT.pm:_get_image_repository_path(3271)|returning > > > > >>> repository path for vcl.is.marist.edu: /storage/x86/image/x86 > >>> 2010-05-10 > >>> 12:31:32|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning > > image > >>> size: 0 MB (4 bytes) > >>> 2010-05-10 > >> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image > >>> size is the same: 0=0, copy may be complete > >>> 2010-05-10 > >> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1238)|image > >>> copy not complete, sleeping for 30 seconds > >>> 2010-05-10 > >>> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1239)|attempt > > 39/40: > >>> image copy not complete, sleeping for 30 seconds > >>> 2010-05-10 12:31:36|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:36 > >>> 2010-05-10 12:31:41|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:41 > >>> 2010-05-10 12:31:46|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:46 > >>> 2010-05-10 12:31:51|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:51 > >>> 2010-05-10 12:31:56|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:31:56 > >>> 2010-05-10 12:32:01|7448|vcld:main(165)|lastcheckin time updated for > >>> management node 1: 2010-05-10 12:32:01 > >>> 2010-05-10 > >> 12:32:02|9225|144:178|image|xCAT.pm:_nodeset_option(1697)|node4 > >>> in image image-x86-winvista-Windows7FacStaff49-v0-all state > >>> 2010-05-10 > >>> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1246)|nodeset > > status > >>> for node4: image image-x86-winvista-Windows7FacStaff49-v0-all > >>> 2010-05-10 > >>> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1254)|checking > size > > > >> of > >>> winvista-Windows7FacStaff49-v0 > >>> 2010-05-10 > >>> 12:32:02|9225|144:178|image|xCAT.pm:get_image_size(3109)|getting size > > of > >>> image: winvista-Windows7FacStaff49-v0 > >>> 2010-05-10 > >>> > > > > 12:32:02|9225|144:178|image|xCAT.pm:_get_image_repository_path(3175)|management > > > > >>> node identifier argument was not specified > >>> 2010-05-10 > >>> > > > > 12:32:02|9225|144:178|image|xCAT.pm:_get_image_repository_path(3197)|attempting > > > > >>> to determine repository path for image on vcl.is.marist.edu: > >>> |9225|144:178|image| image id: 49 > >>> |9225|144:178|image| OS name: winvista > >>> |9225|144:178|image| OS type: windows > >>> |9225|144:178|image| OS install type: partimage > >>> |9225|144:178|image| OS source path: image > >>> |9225|144:178|image| architecture: x86 > >>> 2010-05-10 > >>> > > > > 12:32:02|9225|144:178|image|xCAT.pm:_get_image_repository_path(3271)|returning > > > > >>> repository path for vcl.is.marist.edu: /storage/x86/image/x86 > >>> 2010-05-10 > >>> 12:32:02|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning > > image > >>> size: 0 MB (4 bytes) > >>> 2010-05-10 > >> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image > >>> size is the same: 0=0, copy may be complete > >>> > >>> |9225|144:178|image| ---- WARNING ---- > >>> |9225|144:178|image| 2010-05-10 > >>> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1278)|image copy > >> timed > >>> out, waited 20 minutes, nodeset status for node4 never changed to > boot: > > > >>> image image-x86-winvista-Windows7FacStaff49-v0-all > >>> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) > >>> |9225|144:178|image| (-1) xCAT.pm, capture_monitor (line: 1278) > >>> |9225|144:178|image| (-2) xCAT.pm, capture (line: 1183) > >>> |9225|144:178|image| (-3) image.pm, process (line: 162) > >>> |9225|144:178|image| (-4) vcld, make_new_child (line: 594) > >>> |9225|144:178|image| (-5) vcld, main (line: 341) > >>> > >>> > >>> |9225|144:178|image| ---- WARNING ---- > >>> |9225|144:178|image| 2010-05-10 > >>> 12:32:02|9225|144:178|image|xCAT.pm:capture(1187)|problem occurred > > while > >>> monitoring image capture > >>> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) > >>> |9225|144:178|image| (-1) xCAT.pm, capture (line: 1187) > >>> |9225|144:178|image| (-2) image.pm, process (line: 162) > >>> |9225|144:178|image| (-3) vcld, make_new_child (line: 594) > >>> |9225|144:178|image| (-4) vcld, main (line: 341) > >>> > >>> > >>> |9225|144:178|image| ---- WARNING ---- > >>> |9225|144:178|image| 2010-05-10 > >>> > > > 12:32:02|9225|144:178|image|image.pm: > process(166)|winvista-Windows7FacStaff49-v0 > > > > >>> image failed to be captured by provisioning module > >>> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) > >>> |9225|144:178|image| (-1) image.pm, process (line: 166) > >>> |9225|144:178|image| (-2) vcld, make_new_child (line: 594) > >>> |9225|144:178|image| (-3) vcld, main (line: 341) > >>> > >>> 2010-05-10 12:32:04|9225|144:178|image|utils.pm:mail(1348)|SUCCESS -- > >>> Sending mail To: , PROBLEM -- image.pm > >>> > >>> |9225|144:178|image| ---- CRITICAL ---- > >>> |9225|144:178|image| 2010-05-10 > >>> > > > 12:32:02|9225|144:178|image|image.pm: > reservation_failed(390)|winvista-Windows7FacStaff49-v0 > > > > >>> image creation failed > >>> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) > >>> |9225|144:178|image| (-1) image.pm, reservation_failed (line: 390) > >>> |9225|144:178|image| (-2) image.pm, process (line: 167) > >>> |9225|144:178|image| (-3) vcld, make_new_child (line: 594) > >>> |9225|144:178|image| (-4) vcld, main (line: 341) > >>> > >>> 2010-05-10 12:32:04|9225|144:178|image|utils.pm:mail(1348)|SUCCESS -- > >>> Sending mail To: r...@localhost, VCL -- NOTICE DELAY Image Creation > >>> Windows7FacStaff > >>> 2010-05-10 12:32:05|9225|144:178|image|utils.pm:mail(1348)|SUCCESS -- > >>> Sending mail To: , VCL -- NOTICE FAILED Image Creation > Windows7FacStaff > >>> 2010-05-10 > >>> > 12:32:05|9225|144:178|image|utils.pm:update_request_state(2186)|request > > > >>> 144 state updated to: maintenance, laststate to: image > >>> 2010-05-10 > >>> 12:32:05|9225|144:178|image|image.pm:reservation_failed(442)|request > >> state > >>> set to maintenance, laststate to image > >>> 2010-05-10 > >>> > > > 12:32:05|9225|144:178|image|utils.pm:update_computer_state(2228)|computer > >>> 6 state updated to: maintenance > >>> 2010-05-10 > >>> 12:32:05|9225|144:178|image|image.pm:reservation_failed(450)|node4 > > state > >>> set to maintenance > >>> 2010-05-10 > >>> 12:32:05|9225|144:178|image|image.pm:reservation_failed(457)|exiting > >>> 2010-05-10 > 12:32:05|9225|144:178|image|State.pm:DESTROY(905)|destructor > > > >>> called, ref($self)=VCL::image > >>> 2010-05-10 > >>> > > > 12:32:05|9225|144:178|image|utils.pm: > delete_computerloadlog_reservation(7551)|removing > > > > >>> computerloadlog entries matching loadstate = begin > >>> 2010-05-10 > >>> > > > 12:32:05|9225|144:178|image|utils.pm: > delete_computerloadlog_reservation(7598)|deleted > > > > >>> rows from computerloadlog for reservation id=178 > >>> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(912)|removed > >>> computerloadlog rows with loadstate=begin for reservation > >>> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(924)|number of > > >>> database handles state process created: 1 > >>> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(933)|process > > has > >> a > >>> database handle stored in $ENV{dbh}, attempting disconnect > >>> 2010-05-10 > 12:32:05|9225|144:178|image|State.pm:DESTROY(935)|$ENV{dbh}: > > > >>> database disconnect successful > >>> 2010-05-10 > 12:32:05|9225|144:178|image|State.pm:DESTROY(949)|VCL::image > > > >>> process 9225 exiting > >>> 2010-05-10 12:32:05|7448|vcld:REAPER(744)|VCL process exited for > >>> reservation 178 > >>> Roger Herling > >>> Sr. Desktop Administrator > >>> Marist College > >>> PH: 845-575-3347 > >>> > >>> > >>> > >>> From: > >>> "Waldron, Michael H" <mwald...@email.unc.edu> > >>> To: > >>> "'vcl-dev@incubator.apache.org'" <vcl-dev@incubator.apache.org> > >>> Date: > >>> 05/10/2010 02:50 PM > >>> Subject: > >>> RE: Change image timeout > >>> > >>> > >>> > >>> Roger, > >>> > >>> By image uploads do you mean capturing a new image? From what I've > >>> observed with ours, as long as the image file size is increasing on > the > > > >>> management node, it assumes the capture is still proceeding and > >> continues > >>> to check. > >>> > >>> Do you have vcld.log output you can provide from when the problem > >> occurs? > >>> Mike Waldron > >>> Systems Specialist > >>> ITS Research Computing > >>> University of North Carolina at Chapel Hill > >>> CB #3420, ITS Manning, Rm 2509 > >>> 919-962-9778 > >>> > >>> > >>> -----Original Message----- > >>> From: Roger Herling [mailto:roger.herl...@marist.edu] > >>> Sent: Monday, May 10, 2010 11:28 AM > >>> To: vcl-dev@incubator.apache.org > >>> Subject: Change image timeout > >>> > >>> Where do I need to make changes to scripts to increase the image > > capture > >>> wait time restore time etc.. I am having issues with image uploads > >> taking > >>> longer than allowed to upload. > >>> > >>> > >>> > >>> Roger Herling > >>> Sr. Desktop Administrator > >>> Marist College > >>> PH: 845-575-3347 > >>> > >>> > >>> > > > > -- > Andy Kurth > Virtual Computing Lab > Office of Information Technology > North Carolina State University > andy_ku...@ncsu.edu > 919.513.4090 > > -- Vallard http://sumavi.com