Hello Tobi and all readers, on Sunday, January 27, 2008 at 2:09:30 PM means Tobi: > Sebastian Dellit wrote: >> The options for the control plugin are correct but the >>
> Are you sure? The control plug-in must be configured to use the same tty > as VDR. > See the KEYB_TTY setting in /etc/default/vdr and the -t option in > /etc/vdr/plugins/plugin.control.conf. Thanks for this hint. I add the line KEYB_TTY=/dev/tty1 after the line OPTIONS="-w 60" I also add a line -t /dev/tty1 in the plugin config file. When I start the vdr I geht the following error in the syslog: Jan 27 14:18:12 media vdr: [4068] max. latency time 1 seconds Jan 27 14:18:12 media vdr: [4082] clearing device because of consecutive poll timeouts Jan 27 14:18:13 media vdr: [4083] buffer usage: 70% (tid=4082) Jan 27 14:18:13 media vdr: [4083] buffer usage: 80% (tid=4082) Jan 27 14:18:14 media vdr: [4083] buffer usage: 90% (tid=4082) Jan 27 14:18:14 media vdr: [4083] buffer usage: 100% (tid=4082) Jan 27 14:18:14 media vdr: [4083] ERROR: 1 ring buffer overflow (177 bytes dropped) Jan 27 14:18:20 media vdr: [4083] ERROR: 16516 ring buffer overflows (3105008 bytes dropped) Jan 27 14:18:26 media vdr: [4083] ERROR: 20564 ring buffer overflows (3866032 bytes dropped) [...] I don't hear audio output from the tv or from my screenreader (suse blinux). When I stop the vdr with # /etc/init.de/vdr stop the stop process takes any secconds. When I restart the vdr with # /etc/init.de/vdr restart The audio output works fine but I means that an other vdr is loaded. :-/ The tty1 isn't mapped by the vdr. -- Best regards Sebastian ICQ: 264706583 | MSM: [EMAIL PROTECTED] | Skype: sebo_de | Yahoo: de_sebo E-Mail: [EMAIL PROTECTED] | Web: www.blindzeln.de _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr