On 02/08/08 16:32, Theunis Potgieter wrote: > I am using vdr-1.5.13 > > - start vdr and switch to encrypted channel > - set timer on encrypted channel one minute in advance from current time > - switch to same Transponder with FTA channel, in my situation a radio channel > - once the timer started I cannot switch back to the encrypted channel > with message channel is not available. In the recordings list it shows > the file but in 0 size. > - stop timer is the only way to switch back to encrypted channel. > > Theunis
I did this now, and it also worked just fine. Are you using a "plain vanilla" VDR, or are there any patches involved? Klaus > On 08/02/2008, Klaus Schmidinger <[EMAIL PROTECTED]> wrote: >> I tried to reproduce this here, but everything worked fine. >> Here's what I did: >> >> - start VDR with only a single FF card with one CAM >> - switch to an encrypted channel >> => channel displays in live mode >> - start a recording on that channel >> => recording successful >> - switch to an FTA channel on the same transponder >> => channel displays in live mode >> - start a recording on that channel >> => recording successful >> >> At this point I had two recordings running on the same transponder, >> one with an encrypted channel and one FTA. >> >> This also worked the other way round (first recording FTA, then encrypted). >> >> This was done with the version 1.5.13 code base. >> >> Does the problem still persist on your system with VDR 1.5.13? >> >> Klaus _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
