> On 05/08/08 12:12, Simon Baxter wrote: >>>> OK - I'm getting this: >>>> >>>> SetPlayMode: 0 >>>> frame: (0, 0)-(720, 576), zoom: (1.05, 1.01) >>>> GetDevice 20 0 1 -1 >>>> no device found >>>> >>>> >>>> any ideas? >>> If it makes any difference, I'm running vdr-1.6.0 with a budget >>> TT-1500-C >>> (with Alpha Multicrypt) and a FF TT-2300-C (also with Alpha Multicrypt). >>> The card failing on this channel is the FF one (other card is tied up >>> recording on another transponder) >>> >>> only seems to be failing with a single channel - other encrypted >>> channels >>> within the same boquet work fine.... >>> >>> works: >>> UKTV;T:674000:C0M64:C:6900:1310+1210:1410=eng:0:606:810:182:8:0 >>> >>> doesn't work: >>> Sky >>> Movies;T:674000:C0M64:C:6900:1301+8190:1401=eng,1501=enm:0:606:801:182:8:0 >> >> Have tried the 1.6.0-1 patch, still get: >> SetPlayMode: 0 >> frame: (0, 0)-(720, 576), zoom: (1.05, 1.01) >> GetDevice 20 0 1 -1 >> no device found >> >> with this channel.... > > Here what you could try: > > - swap the CAMs > - use only one CAM at a time > - try the CAMs with either of the DVB cards
Hi again The problem is following the TT-2300-C card, not the cam or smartcard. And it's fine on the TT-1500 Budget card. It's really weird. It's only the Movies channel affected, and each time I tune to it get about 1 second of picture then "NO SIGNAL". The "NO SIGNAL" coincides with the "GetDevice" message. Any ideas? _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
