Приветствую, Klaus does your vdr-1.7.1-s2api.diff good for vdr 1.7.0 ?
> The attached patch is what I've gathered from various postings > regarding adapting VDR to the S2API driver API (thanks to > Igor M. Liplianin, Niels Wagenaar and Edgar Hucek - did I forget anybody?). > > Since the S2SAPI doesn't provide a way of determining whether > a DVB-S device supports DVB-S2 (at least I didn't find any), > you need to apply the second attached patch to the driver > in order to impelement a new capability flag that reports > the availability of DVB-S2 support. > > If you don't want to patch the driver, you can change the line > > case FE_QPSK: frontendType = (frontendInfo.caps & > FE_CAN_2ND_GEN_MODULATION) ? SYS_DVBS2 : SYS_DVBS; break; > > in dvbdevice.c to avoid FE_CAN_2ND_GEN_MODULATION. Either set frontendType > permanently > to SYS_DVBS or SYS_DVBS2, depending on what you have. > > > So far DVB-S and DVB-S2 appears to tune fine. > DVB-C is completely untested. > With DVB-T tuning doesn't work, even though my TDA10046H based DVB-T card > does work with the S2API driver under VDR 1.6.0. > > So for the moment I would appreciate if people could test DVB-T > tuning and check whether maybe I made some silly mistake in the > DVB-T tuning code. _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr