2010/6/26 Jonas Bardino <jo...@bardinosen.dk>: > Luis Fernandes wrote: >> 2010/6/23 Jonas Bardino <jo...@bardinosen.dk>: >>> Bjørnar Nilsen wrote: >>>> Den 22.06.2010 07:21, skrev ECLiPSE: > <cut: problems with LATM AAC audio in Scandinavia> >> >> hello, try to do as I did with svn xine-lib 1.2 >> >> read this >> http://hg.debian.org/hg/xine-lib/xine-lib-1.2-vdpau/file/57d31b4ca5e0/contrib/README.contrib >> >> and compile xine-lib with new sources of libfaad2 on contrib folder >> >> http://www.audiocoding.com/faad2.html download from this site >> >> is working with me to Portugal. >> >> only on vdr-xineliboutput. >> >> and yes Femon 1.7.7 does not detect this audio codec, this one must be >> update like vdr-xine >> >> hope that helps, >> >> best regards. >> >> _______________________________________________ >> vdr mailing list >> vdr@linuxtv.org >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > Thanks for your advice! > I've tried to follow it but still get the libfaad errors[1] and no audio > with plain xine on the previously mentioned sample. No audio on the > relevant channels with vdr+xineliboutput+sxfe either. > Can you actually play the audio of that http://www.nilux.com/2.ts sample > with plain xine? > > Perhaps you would be as kind as to explain a bit more about your > compilation to make completely sure I understand exactly what you mean? > A private mail is fine if it is irrelevant to the list. > > I've tried building both with the yavdr source package and with a plain > xine checkout but with the same result. Configure says it uses internal > libfaad and ldd no longer says that the xine faad plugin file is > dynamically linked to libfaad. I had to make some changes to get it > compiled, though, as shown in my step by step description below[2]. > > Do you apply any additional faad or xine patches? > > Thanks in advance! > > Cheers, Jonas > > [1] Error output from xine --verbose=2 2.ts > load_plugins: plugin faad will be used for audio streamtype 0e. > Allocate 4 reference frames > Create decoder: vdp_device: 1, profile: 8, res: 1280x720 > audio_alsa_out: audio rate : 44100 requested, 48000 provided by device/sec > audio_alsa_out:open pause_resume=0 > output sample rate 48000 > will resample audio from 44100 to 48000 > libfaad: Channel coupling not yet implemented > libfaad: Invalid number of channels > libfaad: Bitstream value not allowed by specification > ... repeated ... > > [2] Building from a xine-lib-1.2-vdpau checkout (the copying around to > tmp is slightly silly but it follows the structure I needed for the > yavdr package): > rm -rf faad2* xine-lib-1.2-vdpau* > wget http://downloads.sourceforge.net/faac/faad2-2.7.tar.gz > tar xvf faad2-2.7.tar.gz > hg clone http://hg.debian.org/hg/xine-lib/xine-lib-1.2-vdpau > mkdir -p tmp > cd tmp > rm -rf xine-lib-1.2-vdpau > rsync -aP ../xine-lib-1.2-vdpau . > rm -rf xine-lib-1.2-vdpau/contrib/libfaad/*.{c,h} > rsync -aP ../faad2-2.7/libfaad/ ../faad2-2.7/include/*.h > xine-lib-1.2-vdpau/contrib/libfaad/ > echo '/* dummy placeholder to mimic now removed header */ > > #include "neaacdec.h" > ' > xine-lib-1.2-vdpau/contrib/libfaad/decoder.h > cat xine-lib-1.2-vdpau/contrib/libfaad/common.h | sed > 's@"../config.h"@<config.h>@g' > \ > xine-lib-1.2-vdpau/contrib/libfaad/common.h.tmp > mv xine-lib-1.2-vdpau/contrib/libfaad/common.h{.tmp,} > cd .. > rsync -aP tmp/xine-lib-1.2-vdpau/contrib/libfaad/*.{c,h} > xine-lib-1.2-vdpau/contrib/libfaad/ > echo 'xine-lib-1.2 (1.2.0~hg20100626-0dkvdr1) lucid; urgency=low > > * Updated to latest faad2 release in contrib > > -- Jonas Bardino <jo...@bardino.dk> Sat, 26 Jun 2010 17:22:02 +0000 > ' > xine-lib-1.2-vdpau/debian/changelog.tmp > cat xine-lib-1.2-vdpau/debian/changelog >> > xine-lib-1.2-vdpau/debian/changelog.tmp > mv xine-lib-1.2-vdpau/debian/changelog{.tmp,} > cat xine-lib-1.2-vdpau/debian/control | sed 's/ libartsc0-dev,//g' > \ > xine-lib-1.2-vdpau/debian/control.tmp > mv xine-lib-1.2-vdpau/debian/control{.tmp,} > cd xine-lib-1.2-vdpau > dpkg-buildpackage -rfakeroot > cd .. > > _______________________________________________ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > hello
I think it's a matter of xinelib and not of vdr 1.7.15 so I sent you an email with the description of what I did, however I could not play your file with xine, just with mplayer. best regards _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
