Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one
adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday.
DVB-S channels work fine. However, any attempt to select a DVB-T channel
results in "channel not available".
The Syslog trace during VDR initialisation follows:
Jan 17 18:44:05 Nutrigrain vdr: [2587] video directory scanner thread started
(pid=2586, tid=2587)
Jan 17 18:44:05 Nutrigrain vdr: [2588] video directory scanner thread started
(pid=2586, tid=2588)
Jan 17 18:44:05 Nutrigrain vdr: [2586] reading EPG data from
/home/digitalTV/video/epg.data
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'A -
ATSC'
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'C -
DVB-C'
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'S -
DVB-S'
Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'T -
DVB-T'
Jan 17 18:44:05 Nutrigrain vdr: [2586] probing /dev/dvb/adapter0/frontend0
Jan 17 18:44:05 Nutrigrain vdr: [2586] new device number 1
Jan 17 18:44:05 Nutrigrain kernel: [ 150.671847] dvb_frontend_ioctl_legacy:
doesn't know how to handle a DVBv3 call to delivery system 0
Jan 17 18:44:05 Nutrigrain vdr: [2586] frontend 0/0 provides DVB-S with QPSK
("ST STV0299 DVB-S")
Jan 17 18:44:05 Nutrigrain vdr: [2591] section handler thread started
(pid=2586, tid=2591)
Jan 17 18:44:05 Nutrigrain vdr: [2590] tuner on frontend 0/0 thread started
(pid=2586, tid=2590)
Jan 17 18:44:05 Nutrigrain vdr: [2586] probing /dev/dvb/adapter1/frontend0
Jan 17 18:44:05 Nutrigrain vdr: [2586] new device number 2
Jan 17 18:44:06 Nutrigrain vdr: [2588] video directory scanner thread ended
(pid=2586, tid=2588)
Jan 17 18:44:06 Nutrigrain vdr: [2587] video directory scanner thread ended
(pid=2586, tid=2587)
Jan 17 18:44:10 Nutrigrain kernel: [ 155.838763] dvb_frontend_ioctl_legacy:
doesn't know how to handle a DVBv3 call to delivery system 0
Jan 17 18:44:10 Nutrigrain vdr: [2586] frontend 1/0 provides DVB-S,DVB-S2 with
QPSK ("Conexant CX24116/CX24118")
Jan 17 18:44:10 Nutrigrain vdr: [2594] tuner on frontend 1/0 thread started
(pid=2586, tid=2594)
Jan 17 18:44:10 Nutrigrain vdr: [2595] section handler thread started
(pid=2586, tid=2595)
Jan 17 18:44:15 Nutrigrain vdr: [2586] ERROR (dvbdevice.c,1051):
/dev/dvb/adapter1/frontend1: Device or resource busy
Jan 17 18:44:15 Nutrigrain vdr: [2586] found 2 DVB devices
Note that there is also a DVB-S premium card in the mix which works OK.
It looks like VDR is not picking up the second frontend on the hybrid card as a
result of the 'Device or resource busy' result which is due to frontend 0 being
open on it.
Any suggestions:
Regards,
-----Original Message-----
From: vdr-boun...@linuxtv.org [mailto:vdr-boun...@linuxtv.org] On Behalf Of
Klaus Schmidinger
Sent: Monday, 16 January 2012 2:11 AM
To: vdr@linuxtv.org
Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2
2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
========
This is a *developer* version. Even though *I* use it in my productive
environment. I strongly recommend that you only use it under controlled
conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by
Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many
link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers (triggered by
Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville
Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality()
(triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per frontend.
This requires a DVB driver with version 5.5 or higher that can handle the
DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery
system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands
at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream component
descriptions with blanks (thanks to Torsten Lang for reporting a problem with
EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj
Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB driver
with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks
to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken
TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are events
that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with UTF-8
(suggested
by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice (suggested by
Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery systems
(DVB-S2
and DVB-T2) are no longer written into channels.conf for "first generation"
delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy
translation
mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to switch
between
showing the total length or the remaining time of the recording that is
currently
replayed.
- Fixed wrongfully displaying the length of a recording in the title of the
replay
progress display.
- Fixed frozen live view with device bonding in case the bonded master is used
for
live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
