On 25.08.2013 05:32, Richard Scobie wrote:
Perhaps a little off topic, but I wonder if anyone can shed any light on the
following.
I am viewing a signal that is very close to reception threshold - dish a little
small, STR value 65%, SNR value 67%, but BER and UNC errors as reported by
femon are zero.
As long as I leave the femon plugin active on screen, I can view it
uninterrupted. If I turn it off, within 60 seconds, the picture will disappear
until I activate femon again.
Initally it will only show "SIGNAL" and "CARRIER" indicators active, then after
a short period, everything will lock again and the channel will re-appear.
I am running the latest vdr version with a TT 6400 S2 full feature card, with
latest drivers and firmware. Relevent drivers would be perhaps stv090x or
stv6110x.
Channel parameters DVB-S2, symbol rate 15000 FEC 3/5 QPSK Video 35Mb MPEG2
1920 x 1080, Audio MPEG 270Mb
Do you have both inputs of the TT-S2 6400 connected to satellite cables?
And is there actually a signal on both of them?
Klaus
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
