> I will! :) Who not ... ;-)
> Thanks for a bunch of little gems in this release like "obsolete > channels". Yes, indeed ... :tup > Have to dig into the new CAM stuff, maybe now it's possible to > integrate the CI of Digital Devices... That would be great, christmas has gone recently, but I wouldn't say no for delayed present. === Kind regards fnu > -----Original Message----- > From: vdr-boun...@linuxtv.org [mailto:vdr-boun...@linuxtv.org] On Behalf > Of Lars Hanisch > Sent: Sunday, January 05, 2014 12:54 PM > To: vdr@linuxtv.org > Subject: Re: [vdr] [ANNOUNCE] VDR developer version 2.1.3 > > Am 05.01.2014 12:42, schrieb Klaus Schmidinger: > > VDR developer version 2.1.3 is now available at > > > > ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.3.tar.bz2 > > > > A 'diff' against the previous version is available at > > > > ftp://ftp.tvdr.de/vdr/Developer/vdr-2.1.2-2.1.3.diff > > > > MD5 checksums: > > > > 054f80e0045aa6fad118e9285b52f4f2 vdr-2.1.3.tar.bz2 > > 3c5ab05d5c4d0b984b34e84190e80949 vdr-2.1.2-2.1.3.diff > > > > WARNING: > > ======== > > > > This is a *developer* version. Even though *I* use it in my productive > > environment, I strongly recommend that you only use it under > > controlled conditions and for testing and debugging. > > > > > > Originally I intended to release this version only after the new > > DiSEqC configuration dialog was finished. But in the meantime quite a > > few other things have come up, so I decided to postpone that dialog > > and first release what has piled up so far. > > > > > > The changes since version 2.1.2: > > > > - Changed the return value of cPositioner::HorizonLongitude() to 0 in > case the > > latitude of the antenna location is beyond +/-81 degrees. > > - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). > > - Fixed some compiler warnings with gcc-4.6.3 (thanks to Rolf > Ahrenberg). > > - Changed the name of the SVDRP command RENR to MOVR (suggested by > Rolf Ahrenberg). > > - When cutting a recording it is now checked whether there is already > an edited > > version of this recording (with the same name, but starting with > '%'), and the > > user is prompted for confirmation to overwrite it (suggested by Rolf > Ahrenberg). > > - Revoked "Added maximum signal strength value for TechniSat SkyStar 2 > DVB-S rev 2.3P" > > because it broke things for the "TechniSat AirStar 2" DVB-T card. > > - The LIRC remote control now connects to the socket even if it > doesn't yet exist when > > VDR is started (thanks to Lars Hanisch). > > - Changed the absolute latitude limit for visible satellites to 81.2 > degrees. > > - Added code for parsing LCN and AVC descriptors to libsi (thanks to > Rolf Ahrenberg). > > - In the "Select folder" menu pressing Ok now selects the folder, even > if this is a > > folder that contains sub folders (marked with "..."). To open such a > folder you > > can press the Red key. > > - Fixed a possible access to uninitialized data in cEIT::cEIT() > (reported by Dominik > > Strasser). > > - The new menu category mcRecordingEdit is now used to mark menus that > edit recording > > properties (suggested by Stefan Braun). > > - Changes in the teletext PID no longer cause retuning (and thus > interrupting a > > recording). > > - Removed '_' from the FileNameChars and CharMap translations in > uk_UA.po. > > - Updated the Italian OSD texts (thanks to Diego Pierotto). > > - Fixed a missing initialization in the c'tor of > cSkinLCARSDisplayChannel (thanks to > > Marko Mäkelä). > > - Simplified some conditional expressions in skinlcars.c and > skinsttng.c (suggested > > by Marko Mäkelä). > > - Fixed uninitialized item area coordinates in cSkinLCARSDisplayMenu > (reported by > > Marko Mäkelä). > > - Fixed a possible crash if the recordings list is updated externally > while the > > Recordings menu is open (reported by Lars Hanisch). > > - Added a missing closing ')' in the help and man page entry of the -- > vfat option > > (reported by Lars Hanisch). > > - Fixed setting the name of the video directory to avoid a crash when > using --genindex, > > and also to use the correct directory with --edit (the latter > reported by Marko > > Mäkelä). > > - The Recordings menu can now be called with a cRecordingFilter, which > allows the > > caller to have it display only a certain subset of the recordings > (thanks to Lars > > Hanisch). > > - Added handling UTF-8 'umlaut' characters to cKbdRemote (thanks to > Lars Hanisch). > > - Made it clear that the Data parameter in cDevice::StillPicture() may > point to a > > series of packets, not just a single one (thanks to Thomas Reufer). > > - cDevice::TrickSpeed() now has an additional parameter named Forward, > which indicates > > the direction in which replay is being done (suggested by Thomas > Reufer). This > > information may be necessary for some output devices in order to > properly implement > > trick modes. Authors of plugins that implement output devices will > need to add this > > parameter to their derived cDevice class, regardless of whether they > will make use > > of it or not. > > - Added a note to ePlayMode in device.h that VDR itself always uses > pmAudioVideo when > > replaying a recording (suggested by Thomas Reufer). > > - Fixed some spellings in positioner.h and Doxyfile (thanks to Ville > Skyttä). > > - Changed '%a' to the POSIX compliant '%m' in all scanf() calls > (thanks to Ville > > Skyttä). > > - The new function cCamSlot::Decrypt() can be used by derived classes > to implement a > > CAM slot that can be freely assigned to any device, without being > directly inserted > > into the full TS data stream in hardware. A derived class that > implements Decrypt() > > will also need to set the new parameter ReceiveCaPids in the call to > the cCamSlot > > base class constructor to true, in order to receive the CA pid TS > packets that > > contain data necessary for decrypting. > > - Many member functions of cCamSlot have been made virtual to allow > for easier > > implementation of derived classes. > > - cTSBuffer now provides the number of available bytes in its Get() > function. > > - cDvbDevice::GetTSPacket() now calls CamSlot()->Decrypt() in order to > allow CAM slots > > that can be freely assigned to any device access to the TS data > stream. > > - Added a check to avoid a possible NULL pointer dereference in > cCiSession::SendData() > > (reported by Ville Skyttä). > > - Deleted a superfluous assignment in cPipe::Open() (reported by Ville > Skyttä). > > - The script given to VDR with the '-r' option is now also called > after the recording > > process has actually started (thanks to Christian Kaiser). > > - Avoiding unnecessary pkg-config warnings in plugin Makefiles (thanks > to Ville Skyttä). > > Plugin authors may want to apply the following change to their > Makefile: > > -PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) > > $(VDRDIR)/vdr.pc),$(shell pkg-config --variable=$(1) vdr > > || pkg-config --variable=$(1) ../../../vdr.pc)) > > +PKGCFG = $(if $(VDRDIR),$(shell pkg-config --variable=$(1) > > $(VDRDIR)/vdr.pc),$(shell PKG_CONFIG_PATH="$$PKG_CONFIG_PATH:../../.." > > pkg-config --variable=$(1) vdr)) > > - Eliminated MAXDVBDEVICES (suggested by Oliver Endriss). > > - Channels that are no longer contained in the current SDT of a > transponder are now > > marked with the keyword OBSOLETE in their name and provider fields. > That way you can > > identify obsolete channels when you switch to them, and you can get > the complete > > overview of all obsolete channels by sorting the Channels list by > provider (by > > pressing the 0 key twice). Automatic deletion of obsolete channels > may follow later. > > > > Have fun! > > I will! :) > Thanks for a bunch of little gems in this release like "obsolete > channels". > Have to dig into the new CAM stuff, maybe now it's possible to > integrate the CI of Digital Devices... > > Lars. > > > > > Klaus > > > > _______________________________________________ > > vdr mailing list > > vdr@linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > > > _______________________________________________ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
