Hi Andreas, Thanks a lot for the tip !
lirc_serial is now loading : dmesg [7.492111] lirc_serial: Manually using active low receiver [7.492378] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 2 Unfortunately, remote doesn't work (tested with mode2). I noticed in ".config" file : # CONFIG_LIRC_SERIAL_TRANSMITTER is not set I changed to : CONFIG_LIRC_SERIAL_TRANSMITTER=y And I ran again the worflow, but it doesn't solve. Did I missed something ? Best regards Karim -----Message d'origine----- De : vdr [mailto:vdr-boun...@linuxtv.org] De la part de Birgit & Andreas Böttger Envoyé : jeudi 19 mai 2016 23:38 À : VDR Mailing List Objet : Re: [vdr] TBS driver breaks lirc_serial Hi Karim, Karim schrieb am 19.05.2016 um 22:36: > I have an issue with TBS drivers (even with last version from april 2016). > As soon as I install TBS Linux drivers and reboot, lirc_serial doesn't load > anymore. I use TBS drivers v160405 with OpenSuse 13.2 (kernel 3.16.7-35) but lirc from TBS driver package. My workflow to do this is: cd linux-tbs-drivers make distclean ./v4l/tbs-x86_64.sh make # but only some seconds to initialize build and generate v4l/.config vi v4l/.config # CONFIG_LIRC_STAGING=y and CONFIG_LIRC_SERIAL=m make # remove (with or without backup) original media SICDIR=/lib/modules/sic/`date +%Y-%m-%d_%H:%M`/`uname -r`/kernel/drivers/media/ mkdir -p $SICDIR/media $SICDIR/staging/media mv /lib/modules/`uname -r`/kernel/drivers/media/* $SICDIR/media/ mv /lib/modules/`uname -r`/kernel/drivers/staging/media/* $SICDIR/staging/media/ make install reboot Best regards. Andreas Böttger _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
