Hi all,
I was an active VDR user from about 2004 to 2010 when my children were
younger and there was a need to record TV programs for them. The old
setup was more or less abandoned when I got a smart TV and the family
started to use video streaming services.
Some years ago, I got a Raspberry Pi 2 B and an Astrometa DVB-T2 USB
stick that also includes an infrared receiver. Because its bundled
remote control unit (RCU) has much fewer buttons than the one that I got
with the Hauppauge Nova-T PCI 90002 years ago, I configured lircd to
translate the RC5 codes from the old RCU. For output, I am using
rpihddevice.
Yesterday, I upgraded to VDR 2.5.6 and rpihddevice 1.0.4 from
git://projects.vdr-developer.org/vdr-plugin-rpihddevice.git while
keeping the rest of the Raspbian 9.13 mostly intact.
I installed the self-built software simply by replacing the original
/usr/bin/vdr that was part of the distribution's vdr 2.2.0 package, and
copying the plugin to /usr/lib/vdr/plugins/. It might not be the
cleanest solution, but it worked for me.
I had some trouble with Systemd, which I resolved by creating a
configuration file:
# cat > /etc/systemd/system/vdr.service << EOF
[Service]
Restart=on-failure
RestartSec=1s
ExecStart=/usr/bin/vdr
TimeoutStartSec=infinity
EOF
# systemctl daemon-reload
# service lightdm stop
# service vdr start
I did not double-check it, but I understood that this could entirely
bypass the /etc/init.d/vdr script, which would invoke the runvdr script
(which normally runs vdr in a loop). If I choose Restart from the VDR
menu, systemd will restart it nicely.
I did not configure the Power button yet. Currently, VDR complains that
no -s parameter is given when I press the Power button on the RCU.
Ideally, I think that VDR should suspend the live video output and
somehow inform Systemd that the entire system may be suspended, as far
as VDR is concerned. (Of course, only if there are no recordings or
remote connections active to VDR.) Then, if nothing else prevents the
system from being shut down or suspended, Systemd would do it based on
its configuration.
Years ago, I developed some patches and configuration at
https://iki.fi/msmakela/software/vdr/ to achieve something like this on
my old system, and I would now like to revive this somehow. Ideally, the
Power button would shut down the DVB receiver and display some
indication on the OSD or the video frame buffer that the output has been
suspended.
If my Raspberry Pi were not an "always-on server" that runs some other
services as well, I might want to reimplement the "wake-on-RCU" hardware
that is generating a wake-on-LAN signal via the Nova-T PCI card,
possibly by extending
https://spellfoundry.com/product/sleepy-pi-2-usb-c/ or a similar product
that would implement a wake-on-timer for the Raspberry Pi. Then, the
system would power up nicely either by RCU or by a recording timer.
Integrating the wake-on-timer logic with Systemd could be another
challenge. I might try this on PC hardware, which already supports
wake-on-timer out of the box. A quick search turned up a promising
starting point:
https://www.freedesktop.org/software/systemd/man/systemd.timer.html
The motivation of this exercise is to have a stand-alone VDR front/back
end installation that plays nicely with Systemd, without reinventing any
logic around scheduling, startup, and shutdown.
Maybe one day, once some more progress has been made with Wayland and
when using a Raspberry Pi model with more GPU memory, one could press
the Power button on the RCU and have the live TV pop up either
fullscreen or in a window, on top of the graphical desktop (which would
be available for generic use).
Best regards,
Marko
_______________________________________________
vdr mailing list
vdr@linuxtv.org
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
