On Fri, 2012-05-04 at 14:34 +0300, Itamar Heim wrote: > On 05/04/2012 02:26 PM, Nicholas Kesick wrote: > > > > > > > Date: Fri, 4 May 2012 08:14:14 +0300 > > > From: ih...@redhat.com > > > To: cybertimber2...@hotmail.com > > > CC: us...@ovirt.org > > > Subject: Re: [Users] Host missing cpuFlags > > > > > > On 05/04/2012 06:49 AM, Nicholas Kesick wrote: > > > > I managed to get a host successfully added into oVirt Manager (Fedora16 > > > > minimum install, then used the wiki RPM install method), but the last > > > > event reports "Host <hostname> moved to Non-operational state as host > > > > does not meet the cluster's minimum CPU level. Missing CPU features: > > > > CpuFlags" > > > > > > > > Can anyone shine some light on the problem? The CPU does support > > > > virtualization... and as far as I can tell from cat /proc/cpuinfo does > > > > does have cpu flags. > > > > flags : fpu vme de pse tsc msr *pae* mce cx8 apic sep mtrr pge mca cmov > > > > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm > > > > constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl *vmx* est cid cx16 > > > > xtpr pdcm lahf_lm tpr_shadow > > > > > > what is the cpu level of the cluster? > > > what cluster compatibility level? > > > what does vdsClient -s 0 getVdsCaps shows for cpu flags? > > I didn't even know there was a setting for that until now. This probably > > explains it. > > CPU Level of cluster: Intel Conroe Family > > Cluster Compatibility Level: 3.0 (?) > > Output of vdsClient -S - getVdsCaps: > > vdsClient -s 0 getVdsCaps > > HBAInventory = {'iSCSI': [{'InitiatorName': > > 'iqn.1994-05.com.redhat:238a26703858'}], 'FC': []} > > ISCSIInitiatorName = iqn.1994-05.com.redhat:238a26703858 > > bondings = {'bond4': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, > > 'netmask': '', 'addr': '', 'slaves': []}, 'bond0': {'hwaddr': > > '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': > > []}, 'bond1': {'hwaddr': '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', > > 'addr': '', 'slaves': []}, 'bond2': {'hwaddr': '00:00:00:00:00:00', > > 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}, 'bond3': {'hwaddr': > > '00:00:00:00:00:00', 'cfg': {}, 'netmask': '', 'addr': '', 'slaves': []}} > > clusterLevels = ['3.0'] > > cpuCores = 2 > > cpuFlags = > > fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,pebs,bts,nopl,pni,dtes64,monitor,ds_cpl,vmx,est,cid,cx16,xtpr,pdcm,lahf_lm,tpr_shadow,model_486,model_pentium,model_pentium2,model_pentium3,model_pentiumpro,model_qemu32,model_coreduo,model_Opteron_G1 > > either libvirt isn't reporting this, or there is a vdsm bug filtering it > erroneously. > cc-ing vdsm-devel
I may be completely off here, but isn't this the NX bit problem? You need to have the NX bit set in BIOS for the cpu_family flag to be set correctly. Mike _______________________________________________ vdsm-devel mailing list vdsm-devel@lists.fedorahosted.org https://fedorahosted.org/mailman/listinfo/vdsm-devel